571302
41
Zoom out
Zoom in
Previous page
1/76
Next page
MOX6/MOX8 Owner’s Manual
Quick Guide
41
6 Press the [REC] button to return to the Song
Record display.
7 Press the [P] (Top) button to return to the top of
the Song, then press the [F] (Play) button to start
recording.
As soon as the lead-in count (1-measure) is finished, play
the following notation.
8 After playing the above notation, press the [J]
(Stop) button to stop recording.
If you play any wrong notes, press the [J] (Stop) button,
then try recording again. Repeat as often as necessary until
you get it right.
9 Press the [P] (Top) button followed by the [F]
(Play) button to hear the recorded data.
The recorded data of the Tracks 1 and 2 will be played back.
To stop playback, press the [J] (Stop) button. If you are not
satisfied with the recorded data, try this operation again.
Creating a synthesizer part by
using Arpeggio
Next, record Arpeggio playback via Realtime Recording to
Track 3.
1 In the Song Play mode, select the same Song to
which the Drum and Bass parts have already been
recorded.
2 Press the ARP [ON/OFF] button so that its lamp
lights.
3 Press the [REC] button, followed by the [F1]
SETUP button, then set the parameters as below.
“Type” = “replace
“Quantize” = “off
“Rec Track” = “3”
4 Press the [F2] VOICE button, followed by the
[CATEGORY SEARCH] button then select the
Synthesizer Voice.
Set the Main Category to “Synth Pad” then set the Sub
Category to “Analog.” Move the Cursor [>] button to call up
the Voice List. From this list, select “PRE5 H04 Saw Pad”
then press the [ENTER] button.
HINT
Re-recording a specific part of a Song
(Punch In/Out)
Use the Punch In/Out recording method to record over only a
specific portion of the Track. If you set the start point (Punch In)
and end point (Punch Out), and then start recording from the
top of the Song, the actual recording will be done only between
the Punch In and Punch Out points. In the eight-measure
example below, only the third through the fifth measures are re-
recorded.
NOTE Punch In/Out Recording can only be used with Realtime
recording.
NOTE
Note that the Punch In/Out method always replaces
(destroys) the original data over the specified area.
To execute Punch In/Punch Out recording in the above condition,
set the following parameters beforehand on the [F1] SETUP
display in the Song Record mode.
Type” = “punch”
Punch In = 003:01
Punch Out = 006:01
1234567 8
1234567 8
Recording start Recording stop
Before re-recording
Punch In point Punch Out point
After re-recording
Newly recorded data
NOTE For instructions on using the Location settings, see the
“Reference Manual” PDF document.
Punch Out point
Recording ends at this point and normal
playback of the recording Track starts.
Punch In point
Playback of the recording Track is turned off from this point,
and your keyboard performance will be recorded to the Track.
[SF1] COPYLOC button
Press the [SF1] COPY LOC to assign the measure numbers
registered to the Locations (Loc1 and Loc2) to the Punch
In and Punch Out points.
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha MOX6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha MOX6 in the language / languages: English as an attachment in your email.

The manual is 11,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha MOX6

Yamaha MOX6 User Manual - English - 48 pages

Yamaha MOX6 Installation Guide - English - 10 pages

Yamaha MOX6 User Manual - English - 12 pages

Yamaha MOX6 User Manual - English - 6 pages

Yamaha MOX6 User Manual - German - 48 pages

Yamaha MOX6 Installation Guide - German - 10 pages

Yamaha MOX6 User Manual - German - 14 pages

Yamaha MOX6 Installation Guide - German - 6 pages

Yamaha MOX6 Installation Guide - German - 6 pages

Yamaha MOX6 User Manual - German - 76 pages

Yamaha MOX6 Additional guide - Dutch - 1 pages

Yamaha MOX6 User Manual - Dutch - 76 pages

Yamaha MOX6 Installation Guide - French - 10 pages

Yamaha MOX6 Installation Guide - French - 6 pages

Yamaha MOX6 Installation Guide - French - 6 pages

Yamaha MOX6 User Manual - Italian - 76 pages

Yamaha MOX6 User Manual - Portuguese - 76 pages

Yamaha MOX6 User Manual - Spanish - 76 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info