571289
13
Zoom out
Zoom in
Previous page
1/44
Next page
13
Troubleshooting
The driver cannot be installed.
Is the USB cable connected correctly?
Check the USB cable connection.
Disconnect the USB cable, then connect it again.
[Windows] Is the USB function enabled on your computer?
When you connect the MOTIF to the computer for the first time, if the
“Add New Hardware Wizard” does not appear, the USB function on the
computer may be disabled. Perform the following steps.
1Double-click “System” in the Control Panel to open the System
Properties window.
2Double-click the “Device Manager” tab and make sure that no “!” or
“x” marks appear at “Universal serial bus controller” or “USB Root
Hub.” If you see an “!” or “x” mark, the USB controller is disabled.
For more information, refer to the owner’s manual of your computer.
[Windows] Is any unknown device registered?
If driver installation fails, the MOTIF will be marked as an “Unknown
device,” and you will not be able to install the driver. Delete the
“Unknown device” by following the steps below.
1Double-click “System” in the Control Panel to open the System
Properties window.
2Double-click the “Device Manager” tab. With the “View devices by
type” check box checked, look for “Other devices.”
3If you find “Other devices,” double-click it to extend the tree to look
for “Unknown device.” If one appears, select it and click the
[Remove] button.
4Remove the USB cable from the MOTIF, and make the connection
again.
5Install the driver again.
When controlling the MOTIF from your computer
via USB, the MOTIF does not operate correctly or
no sound is heard.
Did you install the driver?
Is the USB cable connected correctly?
•Are the volume settings of the tone generator, playback device, and
application program set to the appropriate levels?
•Have you selected an appropriate port in the sequence software?
Check whether the MIDI IN/OUT setting in the Utility mode corresponds to
the actually used cable (USB or MIDI).
Playback response is delayed.
Does your computer satisfy the system requirements?
Is any other application or device driver running?
[Macintosh]
Turn off virtual memory.
Disable AppleTalk.
Cannot suspend or resume the computer correctly.
Do not suspend the computer while the MIDI application is running.
If you are using Windows 2000, you may not be able to suspend/resume
normally, depending on the particular environment (USB Host Controller,
etc.). Even so, simply disconnecting and connecting the USB cable will allow
you to use the MOTIF functions again.
How can I delete or re-install the driver?
[Windows Me/98]
1When the MOTIF is recognized correctly, double-click “System” in
the Control Panel to open the System window.
2Double-click the “Device Manager” tab, select “YAMAHA USB
MIDI Driver” and delete it.
3Use the MS-DOS prompt or Explorer to delete the following three
files.
nTo delete these files using Explorer, select “Folder Options” from the
Tool (View) menu, and select “Show all files (and folders).”
• \WINDOWS\INF\OTHER\YAMAHAMOTIF6.INF
• \WINDOWS\SYSTEM\Xgusb.drv
• \WINDOWS\SYSTEM\Ymidusb.sys
4Disconnect the USB cable.
5Restart the computer.
6Re-install the driver.
[Macintosh]
1Delete the files in the following locations:
• System Folder | Control Panels | YAMAHA USB MIDI Patch
• System Folder | Extensions | USB YAMAHA MIDI Driver
• System Folder | OMS Folder | YAMAHA USB MIDI OMS
Driver
2Restart the computer.
3Install the driver and set up OMS.
English
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha MOTIF8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha MOTIF8 in the language / languages: German as an attachment in your email.

The manual is 1,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha MOTIF8

Yamaha MOTIF8 User Manual - English - 33 pages

Yamaha MOTIF8 Additional guide - English - 2 pages

Yamaha MOTIF8 Installation Guide - English - 44 pages

Yamaha MOTIF8 User Manual - English - 300 pages

Yamaha MOTIF8 User Manual - German - 33 pages

Yamaha MOTIF8 Additional guide - German - 2 pages

Yamaha MOTIF8 User Manual - German - 300 pages

Yamaha MOTIF8 User Manual - Dutch - 300 pages

Yamaha MOTIF8 User Manual - French - 33 pages

Yamaha MOTIF8 User Manual - French - 300 pages

Yamaha MOTIF8 Additional guide - French - 2 pages

Yamaha MOTIF8 Installation Guide - French - 44 pages

Yamaha MOTIF8 User Manual - Italian - 300 pages

Yamaha MOTIF8 User Manual - Spanish - 299 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info