571289
281
Zoom out
Zoom in
Previous page
1/300
Next page
281
MOTIF Appendix
Installing Optional Hardware
Appendix
Installing Optional Hardware
Optional units that can be installed to the MOTIF
The following optional units can be installed to the MOTIF.
Locations to which the optional units are installed
Up to three boards can be installed to the rear panel.
Installation Precautions
Before installing the optional hardware, make sure you have a Philips screwdriver.
• Before beginning installation, switch off the power to the MOTIF and connected peripherals, and unplug them from the power outlet.
Then remove all cables connecting the MOTIF to other devices. (Leaving the power cord connected while working can result in electric
shock. Leaving other cables connected can interfere with work.)
• Be careful not to drop any screws inside the instrument during installation (this can be prevented by keeping the optional units and
cover away from the instrument while attaching). If this does happen, be sure to remove the screw(s) from inside the unit before turning
the power on. Loose screws inside the instrument can cause improper operation or serious damage. If you are unable to retrieve a
dropped screw, consult your Yamaha dealer for advice.
• Install the optional units carefully as described in the procedure below. Improper installation can cause shorts which may result in
irreparable damage and pose a fire hazard.
• Do not disassemble, modify, or apply excessive force to board areas and connectors on optional units. Bending or tampering with boards
and connectors may lead to electric shock, fire, or equipment failures.
• Before handling the optional units, you should briefly touch the metal surface to which the optional unit cover is attached (or other such
metallic area — be careful of any sharp edges) with your bare hand so as to drain off any static charge from your body. Note that even a
slight amount of electrostatic discharge may cause damage to these components.
• It is recommended that you wear gloves to protect your hands from metallic projections on optional units and other components.
Touching leads or connectors with bare hands may cause finger cuts, and may also result in poor electrical contact or electrostatic
damage.
• Handle the optional units with care. Dropping or subjecting them to any kind of shock may cause damage or result in a malfunction.
• Be careful of static electricity. Static electricity discharge can damage the IC chips on the Plug-in board. Before you handle the optional
Plug-in board, to reduce the possibility of static electricity, touch the metal parts other than the painted area or a ground wire on the
devices that are grounded.
• Do not touch the exposed metal parts in the circuit board. Touching these parts may result in a faulty contact.
• When moving a cable, be careful not to let it catch on the circuit Plug-in board. Forcing the cable in anyway may cut the cable, cause
damage, or result in a malfunction.
• Be careful not to misplace any of the screws since all of them are used.
• Do not use any screws other than what are installed on the instrument.
Plug-in Boards AIEB 2 or mLAN8E SIMM
P
l
u
g
-
i
n
S
L
O
T
Plug-in Board cover
MOTIF6 MOTIF7 MOTIF8
Plug-in Boards
Plug-in Board cover
Plug-in Board cover
S
C
S
I
MOTIF6 MOTIF7
MOTIF8
AIEB2, mLAN8E, SIMM
Bottom cover for optional units Bottom cover for optional units Bottom cover for
AIEB2, mLAN8E, SIMM
Rear cover for the
AIEB2 or mLAN8E
Rear cover for the
AIEB2 or mLAN8E
Rear cover for the
AIEB2, mLAN8E, SIMM
281


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha MOTIF8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha MOTIF8 in the language / languages: English as an attachment in your email.

The manual is 10,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha MOTIF8

Yamaha MOTIF8 User Manual - English - 33 pages

Yamaha MOTIF8 Additional guide - English - 2 pages

Yamaha MOTIF8 Installation Guide - English - 44 pages

Yamaha MOTIF8 User Manual - German - 33 pages

Yamaha MOTIF8 Additional guide - German - 2 pages

Yamaha MOTIF8 Installation Guide - German - 44 pages

Yamaha MOTIF8 User Manual - German - 300 pages

Yamaha MOTIF8 User Manual - Dutch - 300 pages

Yamaha MOTIF8 User Manual - French - 33 pages

Yamaha MOTIF8 User Manual - French - 300 pages

Yamaha MOTIF8 Additional guide - French - 2 pages

Yamaha MOTIF8 Installation Guide - French - 44 pages

Yamaha MOTIF8 User Manual - Italian - 300 pages

Yamaha MOTIF8 User Manual - Spanish - 299 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info