571289
260
Zoom out
Zoom in
Previous page
1/300
Next page
260
MOTIF Reference
Utility Job mode
Reference Utility mode
[F6]-[SF2] Plug-in board MIDI
From this display you can set various MIDI-related
parameters for the Plug-in board.
• DevNo (Device Number)
Determines the MIDI Device Number of the Plug-in
Board. This number must match the Device Number of the
external MIDI device when transmitting/receiving bulk
data, parameter changes or other system exclusive
messages to/from it.
Settings 1~16, all, off
• PORT NO. (Port number)
Determines the MIDI Port number over which the Plug-in
board receives MIDI data.One port can be set for the
Multi-part Plug-in board and two ports can be set for the
Single part Plug-in board.
Settings off, 1~3
n The Port number for the Effect Plug-in board (VH)
is fixed to 1.
• GM/XG
Determines whether “GM on” and “XG on” messages are
recognized (on) or not (off) . This parameter is available only
when the Multi-part Plug-in board has been installed to slot 3.
Settings on, off
[F6]-[SF3] Plug-in board
Native System Parameters (Slot 1)
From this display you can set the Native System
parameters of the Plug-in board installed to slot 1.
For details on these parameters, refer to the owner’s
manual of your particular Plug-in board.
[F6]-[SF4] Plug-in board
Native System Parameters (Slot 2)
From this display you can set the Native System
parameters of the Plug-in board installed to slot 2.
For details on these parameters, refer to the owner’s
manual of your particular Plug-in board.
[F6]-[SF5] Plug-in board
Native System Parameters (Slot 3)
From this display you can set the Native System
parameters of the Plug-in board installed to slot 3.
For details on these parameters, refer to the owner’s
manual of your particular Plug-in board.
Utility Job mode
In this Mode, you can restore your MOTIF’s User
memory (SRAM, see page 64 ) to the factory default
settings (Factory Set).
When you restore the factory default settings, all the
current settings for all the User voices and
performances on the User Memory will be overwritten
with the factory defaults.
Make sure you are not overwriting any important data.
You should back up any important data to memory
card/SCSI device beforehand.
Factory Set (Restore Factory
Defaults)
1 In the Utility mode, press the [JOB] button to enter
the Utility Job mode.
2 Press the [ENTER] button. (The display prompts
you for confirmation.)
3 Press the [INC/YES] button to execute the Job.
After the Job has been completed, a “Completed”
message appears and operation returns to the
original display.
n To cancel the Job, press the [DEC/NO] button.
4 Press the [UTILITY] button to exit from the
Utility Job mode back to the Utility mode.
n All settings in the Utility mode that are related to
the Plug-in boards and the mLAN8E are stored
only to the memory on those respective devices,
and not to the User memory of the MOTIF.
Because of this, the Factory Set operation cannot be
used to restore settings for those devices.
260


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha MOTIF8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha MOTIF8 in the language / languages: English as an attachment in your email.

The manual is 10,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha MOTIF8

Yamaha MOTIF8 User Manual - English - 33 pages

Yamaha MOTIF8 Additional guide - English - 2 pages

Yamaha MOTIF8 Installation Guide - English - 44 pages

Yamaha MOTIF8 User Manual - German - 33 pages

Yamaha MOTIF8 Additional guide - German - 2 pages

Yamaha MOTIF8 Installation Guide - German - 44 pages

Yamaha MOTIF8 User Manual - German - 300 pages

Yamaha MOTIF8 User Manual - Dutch - 300 pages

Yamaha MOTIF8 User Manual - French - 33 pages

Yamaha MOTIF8 User Manual - French - 300 pages

Yamaha MOTIF8 Additional guide - French - 2 pages

Yamaha MOTIF8 Installation Guide - French - 44 pages

Yamaha MOTIF8 User Manual - Italian - 300 pages

Yamaha MOTIF8 User Manual - Spanish - 299 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info