586887
293
Zoom out
Zoom in
Previous page
1/320
Next page
MOTIF XS Owner’s Manual 293
Appendix
Installing Optional Hardware
Available devices
The following optional devices can be installed to the
MOTIF XS.
Installation locations
mLAN16E2
DIMM
Installation Precautions
Before installing the optional hardware, make sure you
have a Philips screwdriver and ample space to work.
Before beginning installation, switch off the power to the
instrument and connected peripherals, and unplug them from
the power outlet. Installation or removal of any devices should
be started ONLY after the instrument (and the optional
hardware) returns to normal room temperature. Then remove all
cables connecting the instrument to other devices. (Leaving the
power cord connected while working can result in electric
shock. Leaving other cables connected can interfere with work.)
Be careful not to drop any screws inside the instrument during
installation. (This can be prevented by keeping the optional
units and cover away from the instrument while attaching). If this
does happen, be sure to remove the screw(s) from inside the
unit before turning the power on. Loose screws inside the
instrument can cause improper operation or serious damage. If
you are unable to retrieve a dropped screw, consult your
Yamaha dealer for advice.
Install the optional units carefully as described in the procedure
below. Improper installation can cause shorts which may result
in irreparable damage and pose a fire hazard.
Do not disassemble, modify, or apply excessive force to board
areas and connectors on optional units. Bending or tampering
with boards and connectors may lead to electric shock, fire, or
equipment failures.
It is recommended that you wear gloves to protect your hands
from metallic projections on optional units and other
components. Touching leads or connectors with bare hands
may cause finger cuts, and may also result in poor electrical
contact or electrostatic damage.
Be careful of static electricity. Static electricity discharge can
damage the IC chips on the mLAN16E2. Before you handle the
optional mLAN16E2, to reduce the possibility of static electricity,
touch unpainted metal parts or a ground wire on the devices
that are grounded.
Handle the optical units with care. Dropping or subjecting them
to any kind of shock may cause damage or result in a
malfunction.
Do not touch the exposed metal parts in the circuit board.
Touching these parts may result in a faulty contact.
Be careful not to misplace any of the screws.
Do not use any screws other than what are installed on the
instrument. Use of incorrect screws can cause damage.
mLAN16E2 DIMMs
POWER
ON/ OFF
AC IN
THRU
MIDI
OUT IN PHONESPHONES
ASSIGNABLE SUSTAIN
FOOT SWITCH FOOT CONTROLLER
21
ASSIGNABLE OUTPUT OUTPUT
RRL L/MONO
DIGITAL OUT
A/D INPUT
RLGAIN
LCD CONTRASTETHERNET
USB
TO DEVICETO HOST
MOTIF XS6
MOTIF XS7
Rear cover for the mLAN16E2
Rear cover for the mLAN16E2
MOTIF XS6
MOTIF XS7
MOTIF XS8
Bottom cover for the DIMM
Bottom cover for the DIMM
Bottom cover for the DIMM
WARNING
CAUTION
293


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha MOTIF XS7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha MOTIF XS7 in the language / languages: English as an attachment in your email.

The manual is 12,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha MOTIF XS7

Yamaha MOTIF XS7 Installation Guide - English - 6 pages

Yamaha MOTIF XS7 User Manual - English - 54 pages

Yamaha MOTIF XS7 Installation Guide - German - 10 pages

Yamaha MOTIF XS7 Installation Guide - German - 6 pages

Yamaha MOTIF XS7 User Manual - German - 320 pages

Yamaha MOTIF XS7 User Manual - Dutch - 320 pages

Yamaha MOTIF XS7 User Manual - French - 320 pages

Yamaha MOTIF XS7 User Manual - French - 54 pages

Yamaha MOTIF XS7 Installation Guide - French - pages

Yamaha MOTIF XS7 User Manual - Italian - 320 pages

Yamaha MOTIF XS7 User Manual - Portuguese - 320 pages

Yamaha MOTIF XS7 User Manual - Spanish - 320 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info