586887
271
Zoom out
Zoom in
Previous page
1/320
Next page
System Settings (Utility mode, etc.)
MOTIF XS Owner’s Manual 271
Voice mode
Song mode
Pattern mode
Mixing mode
Master mode
Utility mode
File mode Performance
mode
Sampling
mode 1
Sampling
mode 2
Reference
1Setup Number
Determines the Setup number. The parameter settings of
the selected Setup are indicated as new settings on the
right (3).
Settings: 1 – 4
2Current settings
Indicates the current settings of the related parameters.
After selecting a Setup (1), indicated as new settings on
the right (3), press the [ENTER] button to actually call up
the selected Setup (1), which are then indicated as the
current settings (2).
3New settings
Indicates the parameter settings of the selected Setup
above (1).
From this display you can set parameters related to the
Song/Pattern mode, such as Pattern change timing.
nThe settings here do not affect the Performance mode.
1Quantize
Determines the quantize value for Section (Pattern)
switching during playback when you change the Section.
When set to “1,” Patterns (Sections) will always switch on
the first beat of the next measure during playback after you
change the Section. When set to “1/16,” Sections can be
switched on any 16th beat during playback.
Settings: 1 (1 measure), 1/2 (Half note), 1/4 (Quarter note), 1/8 (8th
note), 1/16 (16th note)
2Tempo Hold
Determines whether or not the tempo setting will switch to the
tempo value stored with each Pattern when a new Pattern is
selected during playback. When set to “on,” the tempo will be
retained when Patterns are switched. When set to “off,” the
tempo will switch to that stored with the new Pattern when
Patterns are switched. Normally, set this to “off.”
Settings: on, off
nThe tempo setting data in the Pattern Chain is not affected by
this parameter.
3Load Mixing
Determines whether the Mixing settings are loaded (on) or
not (off) when the Song/Pattern number is changed.
Normally, set this to “on.”
Settings: on, off
nWhen the Load Mixing parameter is set to “off,” song changes
via Song Chain playback do not change the Mixing setup.
4Song Event Chase
Normally, if a Song or Pattern is played back from mid-
point and/or fast-forward or rewind are used, certain data
types (such as Program Change, Pitch Bend, and Control
Change) may not play back as expected. Setting this to a
specific event ensures the playback integrity of the event,
even when fast forwarding or rewinding.
Settings: off, PC (Program Change), PC+PB+Ctrl (Program Change +
Pitch Bend + Control Change)
nKeep in mind that settings other than “off” may result in slower
operation—for example, a pause before starting playback, or
slower rewind/fast-forward speed.
nWhen this is set to “all,” an excessive amount of MIDI data
may be generated, possibly resulting in a MIDI error on the
connected device.
1 Using internal
Sequencer
This setup is useful when you use the
internal sequencer function (Song or
Pattern) by itself.
2 Recording internal
sequencer to
computer
This setup is useful when you transmit
the Song or Pattern playback data to an
external computer and record it to an
application software on the computer.
3 Recording to
computer
This setup is useful when you record
your keyboard performance to an
application software on the computer.
4 Recording Arpeggio
to computer
This setup is useful when you transmit
the Arpeggio playback data to an
external computer and record it to an
application software on the computer.
Other Settings for the Song/Pattern—
[F4] Other
1
2
3
4
271


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha MOTIF XS7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha MOTIF XS7 in the language / languages: English as an attachment in your email.

The manual is 12,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha MOTIF XS7

Yamaha MOTIF XS7 Installation Guide - English - 6 pages

Yamaha MOTIF XS7 User Manual - English - 54 pages

Yamaha MOTIF XS7 Installation Guide - German - 10 pages

Yamaha MOTIF XS7 Installation Guide - German - 6 pages

Yamaha MOTIF XS7 User Manual - German - 320 pages

Yamaha MOTIF XS7 User Manual - Dutch - 320 pages

Yamaha MOTIF XS7 User Manual - French - 320 pages

Yamaha MOTIF XS7 User Manual - French - 54 pages

Yamaha MOTIF XS7 Installation Guide - French - pages

Yamaha MOTIF XS7 User Manual - Italian - 320 pages

Yamaha MOTIF XS7 User Manual - Portuguese - 320 pages

Yamaha MOTIF XS7 User Manual - Spanish - 320 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info