586887
263
Zoom out
Zoom in
Previous page
1/320
Next page
System Settings (Utility mode, etc.)
MOTIF XS Owner’s Manual 263
Voice mode
Song mode
Pattern mode
Mixing mode
Master mode
Utility mode
File mode Performance
mode
Sampling
mode 1
Sampling
mode 2
Reference
3[SF5] Select
Pressing this button calls up the Select Auto Load File
display. From this display you can specify the file (in the
external storage device) to be loaded automatically when
turning the power on (when Auto Load is set to on).
From this display you can specify the file (in the external
storage device) to be loaded automatically when turning the
power on (when Auto Load is set to on).
Move the cursor to
the desired file then press the [ENTER] button to determine
the Auto Load File.
Parameters 14 are the same as the ones in the File
window (page 275) of the File mode.
Audio In/Out Settings—[F2] I/O
(Input/Output)
From this display you can set Audio In/Out parameters.
1Mic/Line
When using the A/D INPUT jacks, this determines the input
source, microphone (mic) or line.
Settings: mic, line
mic
Intended for low output equipment, such as a microphone, electric
guitar or bass.
line
Intended for high output equipment, such as a keyboard, synthesizer,
or CD player.
2L&R Gain
Determines the output gain of the OUTPUT L/MONO and R
jacks.
Settings: 0dB, +6dB
3Assign L&R Gain
Determines the output gain of the ASSIGNABLE OUTPUT L
and R jacks.
Settings: 0dB, +6dB
4) mLAN Gain
Determines the output gain of the mLAN connector.
Settings: 0dB, +6dB
!mLAN Monitor Setup
Determines the audio signal flow for monitoring the sound
when using the MOTIF XS with DAW software installed on a
computer connected to the MOTIF XS via an IEEE1394
cable.
nYou will need to properly set up the DAW software in addition
to making the settings here. For details, see page 47.
Settings: stand alone, with PC, with PC (DirectMonitor)
stand alone
This should be selected when you are using the MOTIF XS alone or are
not using the DAW software even with a computer connected to the
MOTIF XS via an IEEE1394 cable. When this is selected, the audio
signal of the MOTIF XS will be output directly via the OUTPUT L/MONO
and R jacks normally.
with PC
This should be selected when you are using the MOTIF XS as an audio
device with the DAW software. When this is selected, the audio signal
of the MOTIF XS will be output to the DAW software on a computer via
an IEEE1394 cable, merged and mixed with the DAW sound, returned
back to the MOTIF XS, then output via the OUTPUT L/MONO and R
jacks. Selecting this allows you to apply VST Effects within the DAW
software to the MOTIF XS sound.
with PC (DirectMonitor)
This should be selected when recording your keyboard performance to
the DAW software on the computer. The audio signal of the MOTIF XS
will be output directly via the OUTPUT L/MONO and R jacks with the
audio signal sent from the DAW software via an IEEE1394 cable. Keep
in mind that the Rec Monitor of the DAW software should be set to “off”
in order to prevent “double” sound from occurring.
nWhen “with PC” is selected, there may be a short delay
between when you play the keyboard and when you hear the
resulting sound.
nSet this parameter to “stand alone” when the MOTIF XS is not
connected to an external device via an IEEE1394 cable.
System Settings for the Voice
mode—[F3] Voice
From the following displays, you can set parameters
related to the Master Effect, Master EQ, Audio Input part,
Controller, and Micro Tuning in the Voice mode. These
settings will be applied to all Voices. The following displays
are available only when entering the Utility mode from the
Voice mode.
Specifying the Auto Load File
[SF4] [SF5] Select
1
2
3
4
Upper Level
Directory
1
!
2
3
4
5
6
7
8
9
)
263


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha MOTIF XS7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha MOTIF XS7 in the language / languages: English as an attachment in your email.

The manual is 12,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha MOTIF XS7

Yamaha MOTIF XS7 Installation Guide - English - 6 pages

Yamaha MOTIF XS7 User Manual - English - 54 pages

Yamaha MOTIF XS7 Installation Guide - German - 10 pages

Yamaha MOTIF XS7 Installation Guide - German - 6 pages

Yamaha MOTIF XS7 User Manual - German - 320 pages

Yamaha MOTIF XS7 User Manual - Dutch - 320 pages

Yamaha MOTIF XS7 User Manual - French - 320 pages

Yamaha MOTIF XS7 User Manual - French - 54 pages

Yamaha MOTIF XS7 Installation Guide - French - pages

Yamaha MOTIF XS7 User Manual - Italian - 320 pages

Yamaha MOTIF XS7 User Manual - Portuguese - 320 pages

Yamaha MOTIF XS7 User Manual - Spanish - 320 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info