586887
216
Zoom out
Zoom in
Previous page
1/320
Next page
Pattern Playback
MOTIF XS Owner’s Manual
216
Voice mode Song mode Pattern mode Mixing mode Master mode Utility mode File mode
Performance
mode
Sampling
mode 1
Sampling
mode 2
Reference
This Job operation overwrites any data previously existing in the
destination Song and the Undo/Redo (page 223) Job cannot be
used after executing this Job. Important data should always be
saved to a USB storage device connected to the USB TO DEVICE
terminal or to a computer connected to the same network as the
MOTIF XS (page 278).
[SF4] Insert
From this display, you can insert a new event to the Pattern
Chain. After setting the following parameters, press the
[F6] Set button or [ENTER] button to actually insert the
event.
1Event Type
Determines the event type to be inserted.
Settings: Time Signature, Section, end, Tempo Change, Track Mute
end
Indicates the end position of the Pattern Chain.
2Inserting location
Specifies the location at which the new event will be
inserted.
Settings:
MEAS (Measure): 001 – 999
BEAT: 01 – 16 (depends on the meter)
CLOCK: 000 – 479 (depends on the meter)
3Value of the selected event type
Enters the value of the event to be inserted. The values
available differ depending on the selected Event Type (1).
Settings:
Time Signature: 1/16 – 16/16, 1/8 – 16/8, 1/4 – 8/4
Section: A – P, end (end of the data)
Tempo Change: 005.0 – 300.0
Track Mute: m (mute on), blank (mute off)
[SF5] Delete
Deletes the currently selected event. This button is not
available when the cursor is located at the Time Signature
event, Tempo Change or top/bottom of the data.
1Select a Pattern on the Chain Play display.
This step is necessary because each Pattern has its
own dedicated Pattern Chain data.
2Press the [EDIT] button to call up the Chain
Edit display.
3Edit the already-recorded events.
Move the cursor to each of parameters, then set the
value by using the data dial, [INC/YES] and [DEC/NO]
buttons. To make it easier to find desired parameters,
use the View Filter display called up via the [SF1]
button. You can use the Copy function called up via the
[SF2] button to copy the events from a specified range
to another range.
If you wish to delete the event, move the cursor to the
event to be deleted then press the [SF5] button.
If you wish to insert a new event, press the [SF4] button
to call up the Insert display. From this display, you can
input the events one by one.
4Convert the created Pattern Chain data to a
Song.
By using the Convert To Song display called up via the
[SF3] button, you can convert the created Pattern
Chain data to MIDI sequence data and copy the
converted data to a specified Song. This function is
useful for quickly creating backing and accompaniment
parts for Song data.
5Store the created Pattern Chain data to internal
User Memory.
From the Store window called up via the [STORE]
button, you can store the current Pattern including the
created Pattern Chain data to internal memory. After
storing the Pattern data, the Pattern Chain included in
the Pattern is maintained even if the power is turned off.
1From the Chain Edit display, press the [SF4]
Insert button to call up the Insert window.
2Specify the event type to be inserted, the
insertion point (measure, beat, and clock), and
parameter value of the event.
3Press the [F6] Set button to insert the specified
event at the specified location.
You can continue inserting new events since the Insert
Event window remains open. Press the [ENTER] button
to actually insert the event and close the Insert window.
4Press the [EXIT] button to go back to the Chain
Play display.
Pattern Chain Edit Procedure
CAUTION
1
23
Entering New Events
216


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha MOTIF XS7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha MOTIF XS7 in the language / languages: English as an attachment in your email.

The manual is 12,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha MOTIF XS7

Yamaha MOTIF XS7 Installation Guide - English - 6 pages

Yamaha MOTIF XS7 User Manual - English - 54 pages

Yamaha MOTIF XS7 Installation Guide - German - 10 pages

Yamaha MOTIF XS7 Installation Guide - German - 6 pages

Yamaha MOTIF XS7 User Manual - German - 320 pages

Yamaha MOTIF XS7 User Manual - Dutch - 320 pages

Yamaha MOTIF XS7 User Manual - French - 320 pages

Yamaha MOTIF XS7 User Manual - French - 54 pages

Yamaha MOTIF XS7 Installation Guide - French - pages

Yamaha MOTIF XS7 User Manual - Italian - 320 pages

Yamaha MOTIF XS7 User Manual - Portuguese - 320 pages

Yamaha MOTIF XS7 User Manual - Spanish - 320 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info