586887
158
Zoom out
Zoom in
Previous page
1/320
Next page
Editing a Performance
MOTIF XS Owner’s Manual
158
Voice mode Song mode Pattern mode Mixing mode Master mode Utility mode File mode
Performance
mode
Sampling
mode 1
Sampling
mode 2
Reference
Release (Release Time)
Determines how fast the Cutoff Frequency falls from the
sustain level to zero when a note is released.
Depth
Determines the range over which the cutoff frequency of the
Filter EG changes. A setting of 0 will cause the cutoff
frequency not to change. The farther from 0 the value is, the
larger the range of the cutoff frequency. For negative values,
the change of the cutoff frequency is reversed.
Settings: -64 – +0 – +63
nWhen a Drum Voice is selected, not all of the parameters
are available. Unavailable parameters are blank and
cannot be edited.
3Filter
Determines the Cutoff Frequency and Resonance for the
Filter to change the Performance sound. The setting made
here will be added to the same parameters (page 117) of
each Voice as offset.
Cutoff
Determines the cutoff frequency for the Filter. The frequency
set here is the center frequency at which the signals are
affected when they pass through each filter.
Settings: -64 – +0 – +63
Resonance/Width
This parameter’s function varies according to the selected
Filter Type. If the selected filter is an LPF, HPF, BPF (excluding
the BPFw), or BEF, this parameter is used to set the
Resonance. If the selected filter is a BPFw, this parameter is
used to adjust the frequency bandwidth.
Resonance is used to set the amount of Resonance (harmonic
emphasis) applied to the signal at the cutoff frequency. This
can be used in combination with the cutoff frequency
parameter to add further character to the sound.
The Width parameter is used to adjust the width of the band of
signal frequencies passed by the filter with the BPFw.
Settings: -64 – +0 – +63
Equalizer (EQ) Settings—[F5] EQ
From this display you can apply 3-band parametric EQ to
each individual Part, for fine adjustment of the sound. The
EQ shapes for Low and High are fixed as shelving types.
1Frequency
Determines the center frequency. Frequencies around this
point are attenuated/boosted by the Gain setting below.
Higher values produce higher frequencies.
Settings:
Low
50.1 Hz – 2.0 kHz
Middle
139.7 Hz – 10.1 kHz
High
503.8 Hz – 14.0 kHz
2Gain
Determines the level gain for the Frequency (set above), or
the amount the selected frequency band is attenuated or
boosted.
Settings: -12 dB – +0 dB – +12 dB
3Q (Bandwidth)
This varies the signal level at the Frequency setting to
create various frequency curve characteristics. The higher
the setting the smaller the Q (Bandwidth). The lower the
setting, the greater the Q (Bandwidth).
Settings: 0.7 – 10.3
MIDI Receive settings—[F6]
RcvSwitch (Receive Switch)
From this display you can set how each individual Part
responds to various MIDI data, such as Control Change
and Program Change messages. When the relevant
parameter is set to “on,” the corresponding Part responds
to the appropriate MIDI data. Each of the Controller names
in this display indicates the MIDI data generated by using
the corresponding Controller.
nFor Parts to which the Drum Voice is assigned, Sustain is not
available.
1
2
3
+
0
Frequency
Frequency
0.7
10.3
158


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha MOTIF XS7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha MOTIF XS7 in the language / languages: English as an attachment in your email.

The manual is 12,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha MOTIF XS7

Yamaha MOTIF XS7 Installation Guide - English - 6 pages

Yamaha MOTIF XS7 User Manual - English - 54 pages

Yamaha MOTIF XS7 Installation Guide - German - 10 pages

Yamaha MOTIF XS7 Installation Guide - German - 6 pages

Yamaha MOTIF XS7 User Manual - German - 320 pages

Yamaha MOTIF XS7 User Manual - Dutch - 320 pages

Yamaha MOTIF XS7 User Manual - French - 320 pages

Yamaha MOTIF XS7 User Manual - French - 54 pages

Yamaha MOTIF XS7 Installation Guide - French - pages

Yamaha MOTIF XS7 User Manual - Italian - 320 pages

Yamaha MOTIF XS7 User Manual - Portuguese - 320 pages

Yamaha MOTIF XS7 User Manual - Spanish - 320 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info