586887
152
Zoom out
Zoom in
Previous page
1/320
Next page
Editing a Performance
MOTIF XS Owner’s Manual
152
Voice mode Song mode Pattern mode Mixing mode Master mode Utility mode File mode
Performance
mode
Sampling
mode 1
Sampling
mode 2
Reference
copied when a Drum Voice is selected. However, these
parameters are copied when a Normal Voice is selected.
Settings: off (not copied), on (copied)
5Volume*
Determines the volume for each Part. Use this parameter to
adjust the balance between the current Part and other
Parts.
Settings: 0 – 127
6Pan*
Determines the stereo pan position for the Part.
Settings: L63 (far left) – C (center) – R63 (far right)
nNote that this Part Pan parameter may have little or no audible
effect if the Pan for a specific Element is set to the left position
and the Pan for another Element is set to the right position.
7Voice Element Pan
Determines whether the individual pan settings for each
Voice (made in the Voice Element Edit mode) are applied
or not. When this is set to “off,” the basic pan position for
the selected Part is set to center.
Settings: on, off
8Note Shift*
Adjusts the pitch of the Part in semitones.
Settings: -24 – +0 – +24
9Detune
Adjusts the tuning of the Part in cent increments.
Settings: -12.8 Hz – +0 Hz – +12.7 Hz
)Mono/Poly*
Determines the playback method of the Voice for each
Part—monophonic (single note only) or polyphonic
(multiple notes).
Settings: mono, poly
mono
When set to “mono,” the selected Performance is played back
monophonically (only a single note is played back simultaneously). For
many instrument sounds (such as bass and synth lead), this allows a
more natural and smooth sounding legato performance than when this
parameter is set to “poly.”
poly
When set to “poly,” the selected Performance is played back
polyphonically (multiple notes can be played back simultaneously or a
chord is played back).
!Portamento Part Sw*
Determines whether Portamento is applied to the current
Performance or not.
Settings: off, on
@Portamento Time*
Determines the pitch transition time. Higher values mean
longer transition times.
Settings: 0 – 127
#Portamento Mode
Determines how Portamento is applied to your keyboard
performance.
Settings: fingered, fulltime
fingered
Portamento is only applied when you play legato (playing the next note
before releasing the previous one).
fulltime
Portamento is applied to all notes.
$Velocity Limit
Determines the minimum and maximum values of the
velocity range within which each Part will respond. Each
Part will only sound for notes played within its specified
velocity range. If you specify the maximum value first and
the minimum value second, for example “93 to 34,” there
will be a velocity “hole” and the velocity range covered will
be “1 to 34” and “93 to 127.”
Settings: 1 – 127
nYou can also set the velocity from the keyboard by holding
down the [SF6] KBD button and pressing any key with the
desired velocity (strength). For details, see page 82.
%Note Limit
Set the lowest and highest notes of the keyboard range for
each Part. Each Part will only sound for notes played within
its specified range. You can also create a lower and an
upper range for the Element, with a note range “hole” in the
middle, by specifying the highest note first. For example,
setting a Note Limit of “C5 – C4” lets you play the Element
from two separate ranges: C -2 to C4 and C5 to G8. Notes
played between C4 and C5 do not play the selected
Element.
Settings: C -2 – G8
nYou can also set the Key directly from the keyboard, by
holding down the [SF6] KBD button and pressing the desired
key. For details, see page 82.
From this display, you can set the Reverb/Chorus depth
and the Output jack assignment for each Part.
1Reverb Send
Determines the Send level of each Part signal sent to the
Reverb effect. The higher the value, the deeper the Reverb.
Settings: 0 – 127
2Chorus Send
Determines the Send level of each Part signal sent to the
Chorus effect. The higher the value, the deeper the Chorus.
Settings: 0 – 127
Output settings—[SF2] Output
1
2
3
4
5
152


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha MOTIF XS7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha MOTIF XS7 in the language / languages: English as an attachment in your email.

The manual is 12,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha MOTIF XS7

Yamaha MOTIF XS7 Installation Guide - English - 6 pages

Yamaha MOTIF XS7 User Manual - English - 54 pages

Yamaha MOTIF XS7 Installation Guide - German - 10 pages

Yamaha MOTIF XS7 Installation Guide - German - 6 pages

Yamaha MOTIF XS7 User Manual - German - 320 pages

Yamaha MOTIF XS7 User Manual - Dutch - 320 pages

Yamaha MOTIF XS7 User Manual - French - 320 pages

Yamaha MOTIF XS7 User Manual - French - 54 pages

Yamaha MOTIF XS7 Installation Guide - French - pages

Yamaha MOTIF XS7 User Manual - Italian - 320 pages

Yamaha MOTIF XS7 User Manual - Portuguese - 320 pages

Yamaha MOTIF XS7 User Manual - Spanish - 320 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info