586887
145
Zoom out
Zoom in
Previous page
1/320
Next page
Editing a Performance
MOTIF XS Owner’s Manual 145
Voice mode
Song mode
Pattern mode
Mixing mode
Master mode
Utility mode
File mode Performance
mode
Sampling
mode 1
Sampling
mode 2
Reference
From this display, you can set the control functions for the
Knobs, and the up/down range for the Pitch Bend wheel.
1Knob Control Assign
Determines which lamp among the TONE 1, TONE 2, ARP
FX, REVERB, CHORUS and PAN is turned on when
selecting a Performance. This setting can be stored for
each Performance.
Settings: tone1, tone2, ARP FX, reverb, chorus, pan
2Assign 1 Value
3Assign 2 Value
Indicates the level of the Knobs printed “ASSIGN1” and
“ASSIGN2” at the time at which the Performance is
selected with the TONE1 lamp turned on. The functions
assigned to the Knobs are indicated at right of the values
respectively.
Settings: -64 – +0 – +63
nThe functions assigned to the ASSIGN 1/2 Knobs can be set in
the Controller Set display (page 104).
4A. Function 1 Mode
(Assignable Function 1 Mode)
5A. Function 2 Mode
(Assignable Function 2 Mode)
Determines whether the ASSIGNABLE FUNCTION [1] and
[2] buttons functions as a latch type or momentary type.
When set to “latch,” pressing the button alternates the
lamp status between on and off. When set to “momentary,”
pressing/holding the button turns the lamp on and
releasing the button turns the lamp off.
Settings: momentary, latch
6Ribbon Mode (Ribbon Controller mode)
Determines the behavior of the Ribbon Controller. When set
to reset, releasing your finger from the Ribbon Controller
automatically returns the value to the center. When set to
hold, releasing your finger from the Ribbon Controller
maintains the value at the last point of contact.
Settings: hold, reset
7ARP Common Switch
Determines whether Arpeggio is on or off. This parameter
is the same as the Common Switch parameter in the
Arpeggio display (page 139) of the Performance Play
mode.
8ARP Sync Quantize Value
This parameter is the same as the Sync Quantize Value
parameter in the Arpeggio display (page 139) of the
Performance Play mode.
Output Level and Master Effect
settings—[F2] Level/MEF
1Volume*
Determines the output level of the entire Performance. You
can adjust the overall volume, keeping the balance
between all Parts.
Settings: 0 – 127
2Pan*
Determines the stereo pan position of the Performance.
You can also adjust this parameter using the PAN knob on
the front panel.
Settings: L63 (far left) – C (center) – R63 (far right)
nNote that this Performance Pan parameter may have little or no
audible effect if the Pan for a specific Part is set to the left
position and the Pan for another Part is set to the right position.
3Reverb Send*
Adjusts the reverb send level. The higher the value the
deeper the reverb. You can also adjust this parameter
using the knob on the front panel.
Settings: 0 – 127
4Chorus Send*
Adjusts the chorus send level. The higher the value the
deeper the chorus. You can also adjust this parameter
using the knob on the front panel.
Settings: 0 – 127
nWhen Reverb Send/Chorus Send is set to “0” in the
Performance Part Edit mode, the setting here is not available.
Other settings—[SF4] Other
1
2
7
8
3
4
5
6
Output Level settings—[SF1] Level
1
2
3
4
145


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha MOTIF XS7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha MOTIF XS7 in the language / languages: English as an attachment in your email.

The manual is 12,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha MOTIF XS7

Yamaha MOTIF XS7 Installation Guide - English - 6 pages

Yamaha MOTIF XS7 User Manual - English - 54 pages

Yamaha MOTIF XS7 Installation Guide - German - 10 pages

Yamaha MOTIF XS7 Installation Guide - German - 6 pages

Yamaha MOTIF XS7 User Manual - German - 320 pages

Yamaha MOTIF XS7 User Manual - Dutch - 320 pages

Yamaha MOTIF XS7 User Manual - French - 320 pages

Yamaha MOTIF XS7 User Manual - French - 54 pages

Yamaha MOTIF XS7 Installation Guide - French - pages

Yamaha MOTIF XS7 User Manual - Italian - 320 pages

Yamaha MOTIF XS7 User Manual - Portuguese - 320 pages

Yamaha MOTIF XS7 User Manual - Spanish - 320 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info