586887
110
Zoom out
Zoom in
Previous page
1/320
Next page
Editing a Normal Voice
MOTIF XS Owner’s Manual
110
Voice mode Song mode Pattern mode Mixing mode Master mode Utility mode File mode
Performance
mode
Sampling
mode 1
Sampling
mode 2
Reference
1Type
Determines whether or not the Vocoder is applied to the
current Voice. When set to “Thru,” the Vocoder is not
applied to the Voice.
Settings: Thru, Vocoder
2Vocoder Attack
Determines the attack time of the Vocoder sound. The
higher the value, the slower the attack.
Settings: 1ms – 200ms
3Vocoder Release
Determines the release time of the Vocoder sound. The
higher the value, the slower the decay.
Settings: 10ms – 3000ms
4Mic Gate Threshold
Determines the threshold level of the noise gate for the
microphone sound. If noise interferes with the Vocoder
effect, set this parameter to a relatively high value to
prevent noise from producing inadvertent, unexpected
sounds.
Settings: -72dB – -30dB
5Gate Switch
Determines whether or not the microphone sound will be
output from the HPF while you release the notes. Normally,
set this to “on.”
Settings: off, on
off: The microphone sound always will be output. (You can always hear
the microphone sound.)
on: The microphone sound will be output only while pressing the note.
6HPF Freq (High Pass Filter Frequency)
Determines the HPF cutoff frequency for the microphone
input sound. Setting this to a low value results in a
minimally processed input sound—in other words, close to
the original. Setting this to higher values emphasizes the
higher frequency consonant and sibilant sounds (which
make words easier to understand).
Settings: thru, 500Hz – 16.0kHz
7HPF Output Level
Determines the level of the microphone sound output from
the HPF (High Pass Filter).
Settings: 0 – 127
8Formant Shift
Determines the amount (in BPF) by which the cutoff
frequency value of the BPFs (for the Inst Input) is shifted.
This parameter can be used to adjust the pitch of the
Vocoder sound.
Settings: -2, -1, +0, +1, +2
9Formant Offset
Adjusts the cutoff frequencies of all BPFs (for the Inst Input)
finely. This parameter can be used to adjust the pitch of the
Vocoder sound finely.
Settings: -63 – +0 – +63
)Mic Level
Determines the microphone sound level, which is to be
input to the Vocoder.
Settings: 0 – 127
!Inst Input Level
Determines the level of the keyboard performance sound,
which is to be input to the Vocoder.
Settings: 0 – 127
@Noise Input Level
Determines the noise level which is input to the Vocoder.
This can be used to emphasize sibilant and plosive
sounds, and make the speech-like characteristics more
pronounced.
Settings: 0 – 127
#Output Level
Determines the output level of the Vocoder.
Settings: 0 – 127
$Dry/Wet Balance
Determines the balance between the dry sound to which
the effect is not applied and the wet sound to which the
effect is applied. The higher the W setting, the deeper the
effect.
Settings: D63>W – D=W – D<W63
%BPF1 – 10 Gain (Band Pass Filter 1 – 10 Gain)
Determines each output gain of the BPF 1 – 10 for the Inst
Input (keyboard performance sound). The BPF1
corresponds to the lowest Formant while the BPF 10
corresponds to the highest Formant.
Settings: -18dB – +18dB
2
3
4
$
1
%
5
6
7
8
9
)
!
@
#
110


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha MOTIF XS7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha MOTIF XS7 in the language / languages: English as an attachment in your email.

The manual is 12,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha MOTIF XS7

Yamaha MOTIF XS7 Installation Guide - English - 6 pages

Yamaha MOTIF XS7 User Manual - English - 54 pages

Yamaha MOTIF XS7 Installation Guide - German - 10 pages

Yamaha MOTIF XS7 Installation Guide - German - 6 pages

Yamaha MOTIF XS7 User Manual - German - 320 pages

Yamaha MOTIF XS7 User Manual - Dutch - 320 pages

Yamaha MOTIF XS7 User Manual - French - 320 pages

Yamaha MOTIF XS7 User Manual - French - 54 pages

Yamaha MOTIF XS7 Installation Guide - French - pages

Yamaha MOTIF XS7 User Manual - Italian - 320 pages

Yamaha MOTIF XS7 User Manual - Portuguese - 320 pages

Yamaha MOTIF XS7 User Manual - Spanish - 320 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info