586887
81
Zoom out
Zoom in
Previous page
1/320
Next page
Basic StructureBasic Operation
Connections
Basic Section
MOTIF XS Owner’s Manual 81
Basic Operation
Use these four buttons to navigate the display, moving the
cursor around the various selectable items and parameters
in the screen. When selected, the relevant item is
highlighted (the cursor appears as a dark block with
inverse characters). You can change the value of the item
(parameter) at which the cursor is located by using the
data dial, [INC/YES] and [DEC/NO] buttons.
Rotating the data dial to the right (clockwise) increases the
value, while rotating it to the left (counter-clockwise)
decreases it. For parameters with large value ranges, you
can increase the value by 10 by simultaneously holding
down the [INC/YES] button and pressing the [DEC/NO]
button.
To decrease by 10, do the opposite; simultaneously hold
down the [DEC/NO] button and press the [INC/YES]
button.
Each mode described above contains various displays,
with various functions and parameters. To navigate your
way through these displays and select a desired function,
use the [F1] – [F6] buttons and the [SF1] – [SF5] buttons.
When you select a mode, the available displays or menus
appear directly above the buttons at the bottom of the
display (as shown below).
Depending on the currently selected mode, up to six
functions are available and can be called up with the [F1] –
[F6] buttons. Keep in mind that the available functions
differ depending on the selected mode.
Depending on the currently selected mode, up to five
functions (sub-functions) are available and can be called
up with the [SF1] – [SF5] buttons (the [SF6] button is used
mainly to call up the INFO and LIST displays). Keep in
mind that the available functions differ depending on the
selected mode. (Some displays may not have any sub-
functions for these buttons.)
The example display below is called up by pressing the
[F5] button then pressing the [SF1] button.
For parameters having large value ranges (such as the
start and end points of a sample), you can also enter the
value directly, using the buttons below the LCD display as
a numeric keypad. When the cursor is located on such a
parameter, the [NUM] icon appears at the lower right
corner of the LCD display. When the [SF6] NUM button is
pressed in this status, each digit (1 – 9, 0) is assigned to
the [SF1] – [SF5] and [F1] – [F5] buttons as shown below,
allowing you to input a number directly by using these
buttons. Depending on the selected parameter, a negative
value can be input. When such a parameter is selected
and you wish to input a negative value, press the [F6]
button (to which “-” is assigned) then use the [SF1] – [SF5]
and [F1] – [F5] buttons.
After completing the number input, press the [ENTER]
button to actually enter the number.
Moving the Cursor
Changing (editing) parameter values
Functions and Sub-Functions
DEC/NO INC/YES
EXIT
EXECUTE
ENTER
DEC/NO INC/YES
IncreasingDecreasing
Increasing by 1Decreasing by 1
Inputting a number directly
12345
67890-
F1 F2 F3 F4 F5 F6
SF1 SF2 SF3 SF4 SF5 SF6
These functions can be selected
via the corresponding button
([F1] – [F6]).
These functions can be selected
via the corresponding button
([SF1] – [SF6]).
12345
67890-
67890-
F1 F2 F3 F4 F5 F6
SF1 SF2 SF3 SF4 SF5 SF6
12345
F1 F2 F3 F4 F5 F6
SF1 SF2 SF3 SF4 SF5 SF6
You can use these buttons as the numeric keypad.
81


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha MOTIF XS7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha MOTIF XS7 in the language / languages: English as an attachment in your email.

The manual is 12,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha MOTIF XS7

Yamaha MOTIF XS7 Installation Guide - English - 6 pages

Yamaha MOTIF XS7 User Manual - English - 54 pages

Yamaha MOTIF XS7 Installation Guide - German - 10 pages

Yamaha MOTIF XS7 Installation Guide - German - 6 pages

Yamaha MOTIF XS7 User Manual - German - 320 pages

Yamaha MOTIF XS7 User Manual - Dutch - 320 pages

Yamaha MOTIF XS7 User Manual - French - 320 pages

Yamaha MOTIF XS7 User Manual - French - 54 pages

Yamaha MOTIF XS7 Installation Guide - French - pages

Yamaha MOTIF XS7 User Manual - Italian - 320 pages

Yamaha MOTIF XS7 User Manual - Portuguese - 320 pages

Yamaha MOTIF XS7 User Manual - Spanish - 320 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info