586887
32
Zoom out
Zoom in
Previous page
1/320
Next page
Start Guide
Step 3: Selecting and Playing a Performance
MOTIF XS Owner’s Manual
32
5 Key On Start Switch = (on)
When set to “on,” recording starts immediately when you press
any note on the keyboard. Set this parameter to “on” when
using the Arpeggio.
n Indicates the off status, whereas indicates the
on status.
6 Copy Performance Parameters = on
Enter the checkmark when you wish to copy the parameter
settings for Parts 1 – 4 of the Performance to Parts 1 – 4 of the
Song Mixing.
7 Click O (on)
Press the [F5] button to turn the metronome on if you wish to
use the metronome.
4Press any note to start recording.
Play the keyboard in time with the metronome.
You can change the Arpeggio type and settings by
pressing any of the [SF1] – [SF5] buttons while
recording.
5Press the [J] (Stop) button to stop recording
and return to the Performance Play display.
After recording, press the [SONG] button to enter the
Song Play mode then play the recorded Song. As
desired, record the keyboard performance to another
track in the Song Record mode and edit the recorded
data in the Song Edit mode or Song Job mode to
finalize the Song data.
Recording Arpeggio playback to a
••••••••••••••••••••••••••••••••••••
Pattern
If you record your keyboard playing along with Arpeggio
playback in the Performance mode to a Pattern, you can
quickly create full and complete rhythm patterns lasting
just a few measures. These short “Patterns” of MIDI
sequence data can be played back repeatedly in a loop
and then conveniently used as ‘building blocks’ for your
original Songs.
Follow the instructions below, playing with your favorite
Arpeggios in the Performance mode, and record your
improvisations to a Pattern. Once you’ve recorded three or
four good Patterns, you’ll have enough building blocks to
create a complete Song!
1In the Performance Play mode, select a
Performance for recording.
Find the Performance which triggers your favorite
rhythm pattern or phrases via the Arpeggio.
2Press the [I] (Record) button to call up the
Performance Record display.
3Set the following parameters as required in the
Performance Record display.
1 Sequencer Mode = “pattern”
By setting this parameter to “pattern,” you can record your
keyboard performance to the Pattern.
2 Pattern number
Select a destination Pattern number. Executing the
Performance Recording overwrites and erases all the
previously recorded data of the specified Pattern. Make sure
to select a Pattern which contains no data.
3 Section
Select a Section to be recorded, from A – P. If you create
several Sections, you can use them as rhythm variations within
a single Song.
4 Section Length
Set the length of the Section to be recorded. Set the value to 1
– 4 according to the length of the current Arpeggio types.
5 Time Signature = “4/4”
Set the same value here as that of the Arpeggio type.
Normally, set this to “4/4.”
6 Tempo
Set the desired tempo of the metronome and Arpeggio for
recording.
7 Key On Start Switch = (on)
When set to “on,” recording starts immediately when you press
any note on the keyboard. Set this parameter to “on” when
using the Arpeggio.
8 Copy Performance Parameters = on
Enter the checkmark when you wish to copy the parameter
settings for Parts 1 – 4 of the Performance to Parts 1 – 4 of the
Pattern Mixing.
9 Click O (on)
Press the [F5] button to turn the metronome on if you wish to
use the metronome.
4Press any note to start recording. The
recording stops when the end of the Pattern
length is reached.
Recording stops returns to the Performance Play
display. Please note that loop recording is not available
in the Performance Record mode, although it is
available in the Pattern Record mode.
Create several Sections in the Performance Record mode,
then create a Pattern Chain by connecting the Sections
together to create an entire Song. For details, see
page 213.
1
2
3
4
5
8
6
7
9
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha MOTIF XS7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha MOTIF XS7 in the language / languages: English as an attachment in your email.

The manual is 12,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha MOTIF XS7

Yamaha MOTIF XS7 Installation Guide - English - 6 pages

Yamaha MOTIF XS7 User Manual - English - 54 pages

Yamaha MOTIF XS7 Installation Guide - German - 10 pages

Yamaha MOTIF XS7 Installation Guide - German - 6 pages

Yamaha MOTIF XS7 User Manual - German - 320 pages

Yamaha MOTIF XS7 User Manual - Dutch - 320 pages

Yamaha MOTIF XS7 User Manual - French - 320 pages

Yamaha MOTIF XS7 User Manual - French - 54 pages

Yamaha MOTIF XS7 Installation Guide - French - pages

Yamaha MOTIF XS7 User Manual - Italian - 320 pages

Yamaha MOTIF XS7 User Manual - Portuguese - 320 pages

Yamaha MOTIF XS7 User Manual - Spanish - 320 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info