586887
29
Zoom out
Zoom in
Previous page
1/320
Next page
Step 3: Selecting and Playing a Performance
MOTIF XS Owner’s Manual 29
Start Guide
With this method, you can play all the parts of a band by
yourself. This type of Performance also uses different
Arpeggio types assigned to the individual Parts, making it
even easier to sound like a full band. In the example below,
the Drum pattern (by Arpeggio) will be played back
indefinitely even when you release the notes, the Bass line
(by Arpeggio) will be played back by your left hand
performance, and the Guitar backing (by Arpeggio) or
Piano Arpeggio will be played back by your right hand
performance.
In addition, you can change the Arpeggio Type assignment
for each Part by pressing any of the [SF1] – [SF5] buttons.
Using or combining the four methods described above
gives you the ability to create a rich variety of
Performances.
By default, many Performances stored in the User Banks
may be created via the above methods. Try out various
Performances and see which method is used for each.
Creating a Performance by
combining Voices
After checking out the pre-programmed Performances in
the User Banks, try creating your own original
Performance. In this section, we’ll create a Performance by
combining two Voices.
Preparing to create a Performance
••••••••••••••••••••••••••••••••••••
(Initializing the Performance)
1In the Performance Play mode, press the [JOB]
button, and then the [F1] button.
The Initialize display is shown. Make sure that the
check box of “All Parameters” is checked. For details
about the Initialize function, refer to page 159.
2Press the [ENTER] button. (The display
prompts you for confirmation.)
3Press the [INC/YES] button to initialize the
Performance.
Keep in mind that when you execute the Store operation by
pressing the [STORE] button here, the Performance at the
destination will be replaced with the Initialized Performance
above.
nFor details about the Store operation, refer to page 142.
4Press the [PERFORM] button.
The current Performance name will change to
“Initialized Perform” in the display.
nWhen you initialize a Performance, the Voice at Preset
Bank 1, Voice number 1 is assigned to each of all Parts
and all the Parts are turned on by default.
Playing several Voices together
••••••••••••••••••••••••••••••••••••
(Layer)
Try combining two Voices by assigning your favorite Voice
to Part2.
1In the Performance Play display, press the [F2]
button to call up the Voice display.
From this display, you can confirm what Voices are
assigned to the Parts. You can also confirm that all the
Parts are turned on after executing the Initialize function
above.
2Move the cursor to the Part 2, then select the
desired Voice by setting a Bank and Voice
number.
nFrom this display, you can use the Category Search
function to select a Voice. Like in the Voice mode
(page 24), use the [CATEGORY SEARCH] button. Please
note that the category names printed below the Bank
buttons correspond not to the Performance Category but
to the Voice Category.
3Move the cursor to the PART SW check box for
Parts 3 and 4, then remove the checkmark by
pressing the [DEC/NO] button.
When the check mark is removed from the check box,
the corresponding part is turned off. Here, turn the Part
1 and 2 on.
4Play the keyboard.
The Part 1 (Piano Voice) and Part 2 (the Voice you have
selected above) are sounded simultaneously in a layer.
Next, let’s play different Voices with the left and right hands.
Performance Structure Using the Arpeggio
C1 C2 C3 C4 C5 C6
Part 3
Part 1
Part 4
Part 2
Guitar with the Arpeggio
Piano with the Arpeggio
Drum with the Arpeggio Hold = ON
Bass with the Arpeggio
CAUTION
Voice settings
for Part 1
Voice settings
for Part 2
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha MOTIF XS7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha MOTIF XS7 in the language / languages: English as an attachment in your email.

The manual is 12,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha MOTIF XS7

Yamaha MOTIF XS7 Installation Guide - English - 6 pages

Yamaha MOTIF XS7 User Manual - English - 54 pages

Yamaha MOTIF XS7 Installation Guide - German - 10 pages

Yamaha MOTIF XS7 Installation Guide - German - 6 pages

Yamaha MOTIF XS7 User Manual - German - 320 pages

Yamaha MOTIF XS7 User Manual - Dutch - 320 pages

Yamaha MOTIF XS7 User Manual - French - 320 pages

Yamaha MOTIF XS7 User Manual - French - 54 pages

Yamaha MOTIF XS7 Installation Guide - French - pages

Yamaha MOTIF XS7 User Manual - Italian - 320 pages

Yamaha MOTIF XS7 User Manual - Portuguese - 320 pages

Yamaha MOTIF XS7 User Manual - Spanish - 320 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info