571282
32
Zoom out
Zoom in
Previous page
1/86
Next page
MOTIF XF Owner’s Manual
32
Recording in the Performance mode
7 After recording, press the [SONG] button to enter
the Song Play mode, then play the recorded Song.
As desired, record the keyboard performance to another
track in the Song Record mode and edit the recorded data in
the Song Edit mode or Song Job mode to finalize the Song
data. After finalizing the Song data, press the [STORE]
button to store your original Song.
Recording Arpeggio playback to a
Pattern
If you record your keyboard playing along with Arpeggio
playback in the Performance mode to a Pattern, you can
quickly create full and complete rhythm patterns lasting just
a few measures. These short patterns of MIDI sequence
data can be played back repeatedly in a loop and then
conveniently used as ‘building blocks’ for your original
Songs.
Follow the instructions below, playing with your favorite
Arpeggios in the Performance mode, and record your
improvisations to a Pattern. Once you’ve recorded three or
four good Patterns, you’ll have enough building blocks to
create a complete Song!
1 In the Performance Play mode, select a
Performance for recording.
Find the Performance which triggers your favorite rhythm
pattern or phrases via the Arpeggio.
2 Press the [ARPEGGIO ON/OFF] button so that the
lamp lights.
3 Press the [] (Record) button to call up the
Performance Record display.
4 Set the following parameters as required in the
Performance Record display.
1 Sequencer Mode = “pattern
By setting this parameter to “pattern,” you can record your
keyboard performance to the Pattern.
2 Pattern number
Select a destination Pattern number. Executing the
Performance Recording overwrites and erases all the
previously recorded data of the specified Pattern. Make sure
to select a Pattern which contains no data.
3 Section
Select a Section to be recorded, from A – P. If you create
several Sections, you can use them as rhythm variations
within a single Song.
4 Section Length
Set the length of the Section to be recorded. Set the value to
1 – 4 according to the length of the current Arpeggio types.
5 Time Signature = “4/4”
Set the same value here as that of the Arpeggio type.
Normally, set this to “4/4.”
6 Tempo
Set the desired tempo of the metronome and Arpeggio for
recording.
7 Key On Start Switch = (on)
When set to “on,” recording starts immediately when you
press any note on the keyboard. Set this parameter to “on”
when using the Arpeggio.
8 Copy Performance Parameters = on
Enter the checkmark when you wish to copy the parameter
settings for Parts 1 – 4 of the Performance to Parts 1 – 4 of
the Pattern Mixing.
9 Click O (on)
Press the [F5] button to turn the metronome on if you wish to
use the metronome.
5 Press any note to start recording. The recording
stops when the end of the Pattern length is
reached.
Recording stops returns to the Performance Play display.
Please note that loop recording is not available in the
Performance Record mode, although it is available in the
Pattern Record mode.
6 After recording, press the [PATTERN] button to
enter the Pattern Play mode then play the recorded
Pattern.
Create several Sections in the Performance Record mode,
then create a Pattern Chain by connecting the Sections
together to create an entire Song. For details, see page 43.
1
2
3
4
5
8
6
7
9
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha MOTIF XF8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha MOTIF XF8 in the language / languages: English as an attachment in your email.

The manual is 11,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha MOTIF XF8

Yamaha MOTIF XF8 User Manual - English - 53 pages

Yamaha MOTIF XF8 Installation Guide - English - 10 pages

Yamaha MOTIF XF8 Installation Guide - English - 6 pages

Yamaha MOTIF XF8 User Manual - German - 53 pages

Yamaha MOTIF XF8 Installation Guide - German - 10 pages

Yamaha MOTIF XF8 Installation Guide - German - 6 pages

Yamaha MOTIF XF8 User Manual - German - 84 pages

Yamaha MOTIF XF8 User Manual - Dutch - 84 pages

Yamaha MOTIF XF8 User Manual - French - 84 pages

Yamaha MOTIF XF8 Installation Guide - French - 10 pages

Yamaha MOTIF XF8 Installation Guide - French - 6 pages

Yamaha MOTIF XF8 User Manual - Italian - 84 pages

Yamaha MOTIF XF8 User Manual - Portuguese - 84 pages

Yamaha MOTIF XF8 User Manual - Spanish - 84 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info