571280
39
Zoom out
Zoom in
Previous page
1/86
Next page
MOTIF XF Owner’s Manual
39
Creating an original Song
2 Press the [ARPEGGIO ON/OFF] button so that the
lamp lights.
3 Press the [] (Record) button to enter the Song
Record mode.
4 Press the [F1] button to call up the Record Setup
display.
5 Set the following parameters in the Record Setup
display.
5-1 To select the desired track, press the [TRACK] button (the
lamp lights), then press the appropriate Number button
[1] – [16].
5-2 Set the Time Signature to “4/4.”
5-3 Set the Quantize parameter to “off.”
6 Press the [F2] button to call up the Record
Arpeggio display.
7 Set the following parameters as required in the
Arpeggio Record display.
7-1 Set the Switch parameter to on.
7-2 Set the Voice with Arpeggio (ARP) parameter to on.
When this is set to “on,” the Voice matching the selected
Arpeggio type is automatically called up each time the
Arpeggio type is changed.
7-3 Select the Arpeggio type by specifying the Category, Sub
Category and Type.
8 After completing recording setup, press the [R]
(Play) button to start recording.
Press the [R] (Play) button so that its indicator flashes, then
actually start recording after the count-in.
9 When you reach the end of the above notation,
press the [] (Stop) button to stop recording.
If you’ve played any wrong notes, press the [] (Stop)
button, then try recording again.
Correcting wrong notes
If you’ve played any wrong notes while recording and wish to
correct them, press the [EDIT] button from the Song Play
mode to go to the Song Edit mode. Song Edit lets you clean
up and edit data of already recorded Songs or insert new
data to the Songs.
Check for any mistakenly recorded or wrong events on the
Event List display of the Song Edit mode, then correct them
as needed.
1 Select the recorded Song then press the [EDIT]
button to enter the Song Edit mode.
The Event List display appears.
2 Select the track to be edited.
Press the Number button [1]. The list of the MIDI events
recorded in the previous section appears on the display.
NOTE
Various MIDI events as well as note on/off data are shown on
the display if you operate controllers such as Pitch Bend
wheel, knobs and sliders while recording.
3 Use the Cursor buttons to move the cursor to the
location to be edited.
After confirming the location at which the wrong data is
recorded, use the Up/Down Cursor button to move the
cursor to the location, then use the Left/Right Cursor button
to move the cursor to the data type to be corrected. For
example, if you recorded a wrong note data at the 2nd note
of the 3rd beat, move the cursor to the location indicated
MEAS (measure) = 002, BEAT = 03 and CLOCK = 240.
Then, move the cursor to NOTE if you wish to correct the
note data and move the cursor to GATE if you wish to correct
the gate time (note length).
NOTE
Each key has a note name; for example, the lowest (farthest
left) key on the keyboard corresponds to C1 and the highest
(farthest right) key to C6. See page 10.
Recording Track Time Signature
Quantize
Arpeggio
Switch
Voice with
Arpeggio
Arpeggio
type
selection
Location Notes
Velocity
Selected track
Gate time
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha MOTIF XF6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha MOTIF XF6 in the language / languages: English as an attachment in your email.

The manual is 11,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha MOTIF XF6

Yamaha MOTIF XF6 Installation Guide - English - 10 pages

Yamaha MOTIF XF6 Installation Guide - English - 6 pages

Yamaha MOTIF XF6 Installation Guide - English - 6 pages

Yamaha MOTIF XF6 Installation Guide - English - 5 pages

Yamaha MOTIF XF6 Installation Guide - German - 10 pages

Yamaha MOTIF XF6 Installation Guide - German - 6 pages

Yamaha MOTIF XF6 Installation Guide - German - 6 pages

Yamaha MOTIF XF6 User Manual - German - 84 pages

Yamaha MOTIF XF6 User Manual - Dutch - 84 pages

Yamaha MOTIF XF6 User Manual - French - 84 pages

Yamaha MOTIF XF6 Installation Guide - French - 10 pages

Yamaha MOTIF XF6 Installation Guide - French - 6 pages

Yamaha MOTIF XF6 Installation Guide - French - 6 pages

Yamaha MOTIF XF6 User Manual - Italian - 84 pages

Yamaha MOTIF XF6 User Manual - Portuguese - 84 pages

Yamaha MOTIF XF6 User Manual - Spanish - 84 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info