586891
107
Zoom out
Zoom in
Previous page
1/118
Next page
About MIDI
MOTIF-RACK XS Owner’s Manual
107
Basic Structure
Voice
MultiUtility
Reference
The Controls &
Connectors
Setting Up
Listening to
the Sound
Connections
Using a Computer
Quick Guide
Appendix
Reset All Controllers (Control #121)
The values of the following controllers will be reset to the
defaults.
All Notes Off (Control #123)
Clears all notes currently on for the specified channel. However,
if Hold1 or Sostenuto is on, notes will continue sounding until
these are turned off.
Mono (Control #126)
Performs the same function as when an All Sounds Off message
is received, and if the 3rd byte (mono number) is in the range of
0 – 16, it sets the corresponding channel to Mono Mode (Mode
4: m = 1).
Poly (Control #127)
Performs the same function as when an All Sounds Off message
is received, and sets the corresponding channel to Poly Mode.
Program Change
Messages that determine which Voice to select for each Part.
With a combination of Bank Select, you can select not only basic
Voice numbers, but also variation Voice bank numbers. For a list
of the Voices, see the separate Data List.
n When you specify a program change as a number in the range of 0 – 127,
specify a number that is one less than the program number listed in the
Voice List of the separate Data List booklet. For example, to specify
program number 128, you would actually enter program change 127.
Pitch Bend
Pitch Bend messages are continuous controller messages that
allow the pitch of designated notes to be raised or lowered by a
specified amount over a specified duration.
Channel Aftertouch
Messages which let you control the sounds by the pressure you
apply to the keys after the initial striking of the keys, over the
entire channel.
Polyphonic Aftertouch
This message is generated when pressure is applied to a key
after the note is played. Unlike the Channel Aftertouch event,
however, individual data is provided for each key.
System messages are the data related to the overall system of
the device.
System Exclusive Messages
System Exclusive messages control various functions of this
instrument, including master volume and master tuning, tone
generator mode, effect type and various other parameters.
General MIDI (GM) System On
When a “General MIDI system on” message is received, the
instrument will receive MIDI messages which are compatible
with GM System Level 1, and consequently will not receive Bank
Select messages. When the instrument receives the GM System
On, each receive channel of Parts 1 – 16 (in a Multi) will be
assigned to “1 – 16.”
F0 7E 7F 09 01 F7 (Hexadecimal)
n Make sure that the interval between this message and the first note data of
the song is at least a quarter note or greater in length.
MIDI Master Volume
When received, the Volume MSB will be effective for the System
Parameter.
* mm (MSB) = appropriate volume value, ll (LSB) = ignored
F0 7F 7F 04 01 ll mm F7 (Hexadecimal)
Mode Change
When received, the mode of the MOTIF-RACK XS will be
switched.
* n = Device Number (page 100)
* m = 0 – 6, (0: Voice, 1 – 4: not used, 5: Multi, 6: Demo)
F0 43 1n 7F 03 0A 00 01 0m F7 (Hexadecimal)
System Realtime Messages
Active Sensing (FEH)
Once FEH (Active Sensing) has been received, if no MIDI data is
subsequently received for longer than an interval of
approximately 300 msec, this instrument will perform the same
function as when All Sounds Off, All Notes Off, and Reset All
Controllers messages are received, and will then return to a
status in which FEH is not monitored.
Timing Clock (F8H)
This message is transmitted with a fixed interval (24 times per
quarter note) to synchronize connected MIDI instruments. You
can select whether this instrument uses the internal Timing
Clock, or external Timing Clock messages received via MIDI IN
by setting the MIDI Sync parameter: [UTILITY]
MIDI window
“MIDI Sync.”
CONTROLLER VALUE
Pitch Bend Change 0 (center)
Aftertouch 0 (off)
Polyphonic Aftertouch 0 (off)
Modulation 0 (off)
Expression 127 (max)
Hold1 0 (off)
Portamento 0 (off)
Sostenuto 0 (off)
Soft Pedal 0 (off)
Portamento Control Cancels the Portamento source key number
RPN Number not specified; internal data will not change
NRPN Number not specified; internal data will not change
System Exclusive Messages
107


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha MOTIF-RACK XS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha MOTIF-RACK XS in the language / languages: English as an attachment in your email.

The manual is 2,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha MOTIF-RACK XS

Yamaha MOTIF-RACK XS User Manual - German - 118 pages

Yamaha MOTIF-RACK XS User Manual - Dutch - 118 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info