586891
104
Zoom out
Zoom in
Previous page
1/118
Next page
MOTIF-RACK XS Owner’s Manual
104
Basic Structure
Reference
Voice
Multi Utility
The Controls &
Connectors
Setting Up
Listening to
the Sound
Connections
Using a Computer
Quick Guide
Appendix
Appendix
Display Messages
Messages Description
All data is initialized upon power-on.
Continue?
Confirms whether you want to execute a specified operation or not. If you press “YES,” turning the power on
next time will reset all User data to the default initial settings (factory settings).
Are you sure?
Confirms whether you want to execute a specified operation or not.
Bulk data protected.
Bulk data cannot be received because of the setting in the Utility parameters. For details, see page 100.
Completed.
The specified load, save, format, or other Job has been completed.
Device number is off.
Bulk data cannot be transmitted/received since the device number is off.
Device number mismatch.
Bulk data cannot be received since the device numbers don’t match.
Executing...
Never attempt to turn off the power while data is being written to internal memory. Turning the power off in
this state results in loss of all user data and may cause the system to freeze.
Illegal bulk data.
An error occurred while receiving the Bulk data or Bulk Request message.
MIDI buffer full.
process the MIDI data because too much data was received at one time.
MIDI checksum error.
An error occurred when receiving bulk data.
MIDI data error.
An error occurred when receiving MIDI data. Try again.
Mixing Voice full.
The Mixing Voice cannot be stored because the number of Voices already stored has exceeded the
maximum capacity.
Now executing Factory set...
Indicates that the factory-programmed settings are currently being restored.
Now receiving MIDI bulk data...
Indicates that this instrument is receiving MIDI bulk data.
Now transmitting MIDI bulk data...
Indicates that this instrument is transmitting MIDI bulk data.
Please keep power on.
The data is being written to Flash ROM. Never attempt to turn off the power while data is being written to
Flash ROM. Turning the power off while this message is shown results in loss of all user data and may cause
the system to freeze (due to corruption of data in the Flash ROM). This may also result in the MOTIF-RACK
XS being unable to properly start up the next time the power is turned on.
The received MIDI bulk data’s type is
not compatible with the current mode/
voice type.
This message appears when the MOTIF-RACK XS receives the bulk data for a mode different from the
current mode. Set the MOTIF-RACK XS to the mode same as the one for the bulk data. (If the Bulk data is for
the Voice mode, for example, set the MOTIF-RACK XS to the Voice mode.)
This message appears also when the Voice type (Normal Voice or Drum Voice) of the bulk data is different
from that of the currently selected Voice. Match the Voice type.
The setting is available upon next
power-on after storing Utility.
This message appears when the value of the IEEE1394 Driver parameter has been changed and stored,
indicating that the setting will be active when the power is turned on next time.
104


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha MOTIF-RACK XS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha MOTIF-RACK XS in the language / languages: English as an attachment in your email.

The manual is 2,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha MOTIF-RACK XS

Yamaha MOTIF-RACK XS User Manual - German - 118 pages

Yamaha MOTIF-RACK XS User Manual - Dutch - 118 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info