586891
81
Zoom out
Zoom in
Previous page
1/118
Next page
Voice Mode
MOTIF-RACK XS Owner’s Manual
81
Basic Structure
Voice
MultiUtility
Reference
The Controls &
Connectors
Setting Up
Listening to
the Sound
Connections
Using a Computer
Quick Guide
Appendix
Time Key Follow
(EG Time Key Follow Sensitivity)
Determines the degree to which the notes (specifically, their position or octave range) affect the
Amplitude EG times of the selected Element. When this is set to a positive value, high notes result in
a fast Amplitude EG transition speed while low notes result in a slow speed. When this is set to a
negative value, the opposite effect is produced: High notes result in a slow Amplitude EG transition
speed while low notes result in a fast speed. When this is set to 0, the Amplitude EG transition speed
does not change no matter what the pressed note.
Settings: -64 – +0 – +64
AMP Scale (Amplitude Scale)
Break Point 1 – 4 Determines the four Break Points by specifying the respective note numbers.
Settings: C -2 – G8
n Break Point 1 to Break Point 4 will be automatically be arranged in ascending order across the keyboard.
Level Offset 1 – 4 Determines the offset value to the level at each Break Point. For details about Amplitude Scaling,
refer to “Setting example of Amplitude Scaling” (page 90) in the Supplementary information.
Settings: -128 – +0 – +127
LFO (Low Frequency Oscillator)
LFO Wave Selects the Wave and determines how the LFO waveform modulates the sound.
Settings: saw, triangle, square
Speed Determines the speed of the LFO Wave.
Settings: 0 – 63
Key on Reset When this is set to on, the LFO waveform is reset every time a Note On message is received.
Settings: off, on
off ...................................... The LFO cycles freely with no key synchronization. Receiving a Note On message starts the
LFO wave at whatever phase the LFO happens to be at that point.
on ...................................... The LFO resets with each received note and starts a waveform at the phase specified by the
Phase parameter (page 69).
Delay Determines the delay time between the moment a Note On message is received to the moment the
LFO comes into effect. A higher value results in a longer delay time.
Settings: 0 – 127
Fade in Time Determines the amount of time for the LFO effect to fade in after the Delay time has elapsed. A
higher value results in a slower fade-in. When set to “0,” the LFO effect will not fade in and reach the
maximum level immediately after the Delay time has elapsed.
Settings: 0 – 127
P Mod
(Pitch Modulation)
Determines the amount (depth) by which the LFO wave varies (modulates) the pitch of the sound.
The higher the setting, the greater the depth of control.
Settings: 0 – 127
F Mod
(Filter Modulation)
Determines the amount (depth) by which the LFO wave varies (modulates) the Filter Cutoff
frequency. The higher the setting, the greater the depth of control.
Settings: 0 – 127
A Mod
(Amplitude Modulation)
Determines the amount (depth) by which the LFO wave varies (modulates) the amplitude or volume
of the sound. The larger the setting, the greater the depth of control.
Settings: 0 – 127
EQ
Type
(EQ Type)
Determines the EQ Type. The number of parameters and values available differs depending on the
selected EQ type.
Settings: 2 Band (2 Band EQ), P.EQ (Parametric EQ), Boost 6 (Boost +6dB), Boost 12 (Boost +12dB), Boost18 (Boost
+18dB), thru
2 Band............................... This is a “shelving” equalizer, which combines separate high and low frequency bands.
P.EQ................................... The Parametric EQ for the single band is used to attenuate or boost signal levels (gain) around
the Low Freq according to the settings of Low Gain. Determines the bandwidth with which the
sound will be boosted or cut in the “Q” parameter.
Boost 6, Boost 12, Boost18
.......................................... Boosts the entire band of the selected Element by +6dB, +12dB, and +18dB respectively.
These settings have no adjustable parameters.
thru .................................... If you select this, the equalizers are bypassed and the entire signal is unaffected.
Low Freq This parameter is available only when the Type (EQ Type) parameter is set to “2 Band” or “P.EQ.”
When setting to “2 Band,” this determines the center frequency of the lower EQ band. When setting
to “P.EQ,” this determines the center frequency.
Settings: When the Type is set to “2 Band”... 50.1Hz – 2.00kHz, When the Type is set to “P.EQ”... 139.7Hz – 12.9kHz
High Freq This parameter is available only when the Type (EQ Type) parameter is set to “2 Band.” This
determines the center frequency of the high EQ band.
Settings: 503.8Hz – 10.1kHz
81


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha MOTIF-RACK XS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha MOTIF-RACK XS in the language / languages: English as an attachment in your email.

The manual is 2,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha MOTIF-RACK XS

Yamaha MOTIF-RACK XS User Manual - German - 118 pages

Yamaha MOTIF-RACK XS User Manual - Dutch - 118 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info