In the final stages of programming and creating sounds, you can use effects to further enhance and change the character of the sound
— such as by applying a deep, ambient reverb, or by using chorus to make certain sounds richer and more animated. When you edit
Multi Effect parameters, keep in mind that there are two different types:
Parameters specific to individual Parts (in Multi Part Edit)
Part EQ
Insertion Effect Switch on/off and Send Level/Dry Level settings for System Effects
Parameters common to all Parts (in Multi Common Edit)
System Effect settings such as Effect Type and Return Level
Master Effect
Master EQ
Effect setting flow in the Multi mode
nThe audio signals of the Parts for which the “Output Select” parameter (page 96)) is set to something other than “L&R” can be applied at only “Part EQ” and “Ins Effect
(Insertion Effect)” as shown above and output. The signals are not applied at the effect settings after “Chorus Send”/ “Reverb Send”/ “Dry Level” in the signal flow.
Below is an example of editing effect settings in the Multi Mode.
1.
Select the desired Multi for editing in the Multi mode
(page 35).
2.
Press the [EDIT] button to enter the Multi Edit mode.
The Multi Edit Select display appears.
3.
Choose a Part to which you want to apply the
Insertion Effect with the Cursor [
L]/[M]/[<]/[>]
buttons and Encoder knob, then press the [ENTER]
button to actually select the Part for editing.
The Part Edit Select display appears.
4.
Select “Fx Send” by using the Cursor [L]/[M]/[<]/[>]
buttons and Encoder knob, then press the [ENTER]
button.
The Fx Send display appears.
5.
Move the cursor position to “Ins Effect Sw,” then set
the value to on by turning the Encoder knob . If
desired, select a different Part by using the Cursor
[
<]/[>] buttons, then set this parameter likewise.
By setting the Ins Effect Sw parameter to on, you can apply
the Insertion Effect which is set to the Voice of the current
Part to the currently edited Part. Note that this parameter
can be set to on for up to eight Parts simultaneously.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Yamaha MOTIF-RACK XS at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Yamaha MOTIF-RACK XS in the language / languages: English as an attachment in your email.
The manual is 2,76 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
