586891
28
Zoom out
Zoom in
Previous page
1/118
Next page
Voice Mode
MOTIF-RACK XS Owner’s Manual
28
Basic Structure
Reference
Voice
Multi Utility
The Controls &
Connectors
Setting Up
Listening to
the Sound
Connections
Using a Computer
Quick Guide
Appendix
3.
Select a Voice with the Encoder knob or Cursor [L]/
[
M] buttons.
n You can use the Encoder knob or Cursor [L]/[M] buttons to select
the Voice number. This operation lets you call up Voices in
subsequent or previous Banks.
n To quickly move forward through the program (Voice) numbers in
10-step jumps, simultaneously hold down the Cursor [
L] button and
press the Cursor [
M] button in the Play display. To do the same in
reverse, use the opposite operation: simultaneously hold down the
Cursor [
M] button and press the Cursor [L] button.
4.
Play the connected keyboard.
The selected Voice sounds in response to the incoming
MIDI data. Let's play some Voices here.
n Keep in mind there is also an Audition function (page 16) that lets
you listen to and audition each Voice as you select it.
The MOTIF-RACK XS Voices are conveniently divided into some
Categories, irrespective of their bank locations. The categories
are divided based on the general instrument type or sound
characteristics. The Category Search function gives you quick
access to the sounds you want.
1.
Press the Encoder knob in the Voice Play display.
The Category Search dialog appears.
n Press [EXIT] to close the Category Search dialog.
2.
Move the cursor position to “Main” (Main Category)
with the Cursor [
L] button, and turn the Encoder
knob to select the Main Category.
3.
Move the cursor position to “Sub” (Sub Category)
with the Cursor [
M] button, and turn the Encoder
knob to select the Sub Category.
4.
Press the [ENTER] button, Encoder knob, or Cursor
[
>] button to actually call up the Category.
The Voice List of the selected category is shown.
5.
Select the Voice with the Cursor [L]/[M] buttons or
Encoder knob.
If you want to change the Category, press the Cursor [<]
button or [EXIT] button and go back to step 2.
6.
Press the [ENTER] button or Encoder knob to
actually call up the Voice.
This closes the Category Search dialog.
Selecting Voices by receiving MIDI messages
You can select Voices on this instrument from your DAW software
by specifying the following MIDI messages. To do this, the
following three MIDI messages must be transmitted to the
MOTIF-RACK XS.
Bank Select MSB (Control #0)
Bank Select LSB (Control #32)
•Program Change
For example, transmit the following MIDI messages to select the
Voice of program number 12 in the PRE2.
1. Transmit a Bank Select MSB (Control #0) value of 63.
2. Transmit a Bank Select LSB (Control #32) value of 1.
3. Transmit a Program Change value of 12*.
* If you are using a DAW software that has a Program Change value range of 0
to 127, transmit a Program Change value of 11 to the MOTIF-RACK XS.
For details on what values are assigned to the Voice Bank/
Number of this tone generator, see the “MIDI Data Format” in the
separate Data List. Also, for specific Program Change numbers
and the corresponding Voices, refer to the separate Data List.
n Set the MIDI Channel to the same channel as the “Receive Ch (Basic
Receive Channel)” parameter (page 102).
n When MIDI messages are received in the Voice mode, the [VOICE]
button lamp flashes. This provides a quick way to check whether MIDI
data is being received or not.
TIP
Using the Category Search function
Main Category
Sub Category
Currently selected Main
Category and Sub Category
Favorite check box
Voice list of currently
selected category.
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha MOTIF-RACK XS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha MOTIF-RACK XS in the language / languages: English as an attachment in your email.

The manual is 2,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha MOTIF-RACK XS

Yamaha MOTIF-RACK XS User Manual - German - 118 pages

Yamaha MOTIF-RACK XS User Manual - Dutch - 118 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info