The following optional devices can be installed to the MOTIF ES.
Installation locations
Installation Precautions
Before installing the optional hardware, make sure you have a Philips screwdriver and ample space to work. Protective cushions
or supports for the instrument may also be needed.
•Before beginning installation, switch off the power to the instrument and connected peripherals, and unplug them from the power outlet. Then remove all
cables connecting the instrument to other devices. (Leaving the power cord connected while working can result in electric shock. Leaving other cables
connected can interfere with work.) Installation or removal of any devices should be started ONLY after the instrument (and the optional hardware)
returns to normal room temperature.
•Be careful not to drop any screws inside the instrument during installation (this can be prevented by keeping the optional units and cover away from the
instrument while attaching). If this does happen, be sure to remove the screw(s) from inside the unit before turning the power on. Loose screws inside
the instrument can cause improper operation or serious damage. If you are unable to retrieve a dropped screw, consult your Yamaha dealer for advice.
•Install the optional units carefully as described in the procedure below. Improper installation can cause shorts which may result in irreparable damage
and pose a fire hazard.
•Do not disassemble, modify, or apply excessive force to board areas and connectors on optional units. Bending or tampering with boards and
connectors may lead to electric shock, fire, or equipment failures.
•Before handling the optional units, you should briefly touch the metal surface to which the optional unit cover is attached (orother such metallic area \ be
careful of any sharp edges) with your bare hand so as to drain off any static charge from your body. Note that even a slight amount of electrostatic
discharge may cause damage to these components.
•It is recommended that you wear gloves to protect your hands from metallic projections on optional units and other components. Touching leads or
connectors with bare hands may cause finger cuts, and may also result in poor electrical contact or electrostatic damage.
•Handle the optional units with care. Dropping or subjecting them to any kind of shock may cause damage or result in a malfunction.
•Be careful of static electricity. Static electricity discharge can damage the IC chips on the Plug-in board. Before you handlethe optional Plug-in board, to
reduce the possibility of static electricity, touch the metal parts other than the painted area or a ground wire on the devices that are grounded.
•Do not touch the exposed metal parts in the circuit board. Touching these parts may result in a faulty contact.
•When moving a cable, be careful not to let it catch on the circuit Plug-in board. Forcing the cable in anyway may cut the cable, cause damage, or result in
a malfunction.
•Be careful not to misplace any of the screws since all of them are used.
•Do not use any screws other than what are installed on the instrument.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Yamaha MOTIF ES8 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Yamaha MOTIF ES8 in the language / languages: English as an attachment in your email.
The manual is 8,4 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
