571273
278
Zoom out
Zoom in
Previous page
1/300
Next page
Display Messages
278 Owner’s Manual
Appendix
No response from USB device
There is no response from the USB device connected to the USB TO DEVICE terminal.
No sample data. This message appears when a sample-related Job cannot be executed because the specified sample is not available.
Not empty folder You have attempted to delete a folder that contains data.
Now checking plug-in board. The MOTIF ES is checking the Plug-in board installation status during power-on.
Now loading... (xxxx) Indicates that a file is being loaded.
Now saving... (xxxx) Indicates that a file is being saved.
Now scanning auto loaded files Scanning for the files specified for Auto Load.
Now working... Executing the memory arrangement after finishing Sampling or canceling the Load/Save operation by pressing the
[EXIT] button.
Overwrite? [YES]/[NO] A save operation will overwrite data on the SmartMedia/USB storage device, and this message confirms whether it is OK
to continue or not. Press [INC/YES] or [DEC/NO] as required.
Pattern length mismatch. A Pattern Job will result in the length of a Pattern being greater than 256 measures.
Phrase length mismatch A Pattern Job will result in the length of a phrase being greater than 256 measures.
Phrase number overflow The maximum number of phrases (256) has been exceeded when recording, executing a Pattern Job, or editing.
Please keep power on.
The data is being written to Flash ROM.
Never attempt to turn off the power while data is being written to Flash ROM. Turning the power off while this message is
shown results in loss of all user data and may cause the system to freeze (due to corruption of data in the Flash ROM).
This may also result in the MOTIF ES being unable to properly start up the next time the power is turned on.
Please stop sequencer. The operation you’ve attempted to execute cannot be done during Song/Pattern playback.
PLG100 not supported. The Plug-in All Bulk Save function does not apply to the PLG100 series boards.
Plug-in1 communication error. The Plug-in board that has been installed to slot 1 does not work.
Plug-in1 type mismatch. The User Voice created by using the Plug-in board previously installed to slot 1 (but now removed from the slot) has been
selected.
Plug-in2 communication error. The Plug-in board that has been installed to slot 2 does not work.
Plug-in2 type mismatch. The User Voice created by using the Plug-in board previously installed to slot 2 (but now removed from the slot) has been
selected.
Plug-in3 communication error. The Plug-in board that has been installed to slot 3 does not work.
Plug-in3 type mismatch. The User Voice created by using the Plug-in board previously installed to slot 3 (but now removed from the slot) has been
selected.
Power on mode stored The setting of the program number automatically selected when turning the power on has been stored.
Receiving MIDI bulk The MOTIF is receiving MIDI bulk data.
Sample freq is too low. The sampling frequency is too low and the Frequency Convert Job cannot be executed.
Sample is protected. The sample cannot be overwritten because it is protected.
Sample is too long. The sample size is too large and the Time Stretch Job cannot be executed.
Sample is too short. The sample length is too short and the Frequency Convert Job cannot be executed.
Sample memory full. The sample memory is full and further sampling operations, Jobs, or load operations cannot be executed.
Scene & Arpeggio type stored The Song Scene and current Arpeggio type has been stored to one of the [SF1] - [SF5] buttons.
Seq memory full. The internal memory for Sequence data is full, preventing any further operation (such as recording, editing, Job
execution, MIDI reception/transmission, or loading from the SmartMedia/USB storage device). Try again after erasing
unwanted Song, Pattern, or User phrase data.
System memory crashed. Writing data to Flash ROM has failed.
This performance uses user voices. The performance you have loaded includes User voice data. Check whether the voice you saved exists at the
appropriate User voice bank.
Too many favorites You’ve attempted to assign more than 257 voices to the Favorite category.
Too many fixed notes When converting the song or pattern data to the Arpeggio data, the amount of different notes in the data to be converted
has exceeded sixteen.
Too many samples. The maximum overall number of samples (8192) has been exceeded.
Transmitting MIDI bulk The MOTIF ES is transmitting MIDI bulk data.
USB connection terminated. Press
[ENTER]. A break in the connection with the USB storage device has occurred because of an abnormal electric current.
Disconnect the USB storage device from the USB TO DEVICE connector, then press the [ENTER] button.
USB device connecting Recognizing the USB storage device connected to the USB TO DEVICE terminal.
USB power consumption exceeded. The power consumption of the USB storage device connected to the USB TO DEVICE connector exceeds the regulated
value.
USB transmission error An error occurs when communicating with the USB storage device.
Utility stored The settings in the Utility mode have been stored.
LCD Indication Explanation
278


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha MOTIF ES8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha MOTIF ES8 in the language / languages: English as an attachment in your email.

The manual is 8,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha MOTIF ES8

Yamaha MOTIF ES8 Installation Guide - English - 35 pages

Yamaha MOTIF ES8 Installation Guide - German - 35 pages

Yamaha MOTIF ES8 User Manual - German - 300 pages

Yamaha MOTIF ES8 User Manual - Dutch - 300 pages

Yamaha MOTIF ES8 User Manual - French - 300 pages

Yamaha MOTIF ES8 Installation Guide - French - 35 pages

Yamaha MOTIF ES8 User Manual - Italian - 308 pages

Yamaha MOTIF ES8 Installation Guide - Italian - 12 pages

Yamaha MOTIF ES8 User Manual - Portuguese - 300 pages

Yamaha MOTIF ES8 User Manual - Spanish - 297 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info