571272
5
Zoom out
Zoom in
Previous page
1/35
Next page
TOOLS for MOTIF ES6/MOTIF ES7/MOTIF ES8 Installation Guide
5
Installing the driver on Windows 2000
1
Start the computer and use the “Administrator” account to log into
Windows 2000.
2
Select [My Computer | Control Panel | System | Hardware | Driver Signing |
File Signature Verification], and check the radio button to the left of “Ignore
-Install all files, regardless of file signature” and click [OK].
3
Insert the included CD-ROM into the CD-ROM drive.
4
First, make sure the POWER switch on the MOTIF ES is set to OFF, then
use a USB cable to connect the USB connector of the computer (or the USB
hub) to the USB TO HOST connector of the MOTIF ES. When the MOTIF
ES is turned on, the computer automatically displays the “Found New
Hardware Wizard.” Click [Next].
5
Check the radio button to the left of “Search for a suitable driver for my
device. (Recommended).” Click [Next].
The window that appears enables you to select a location in which to install
the driver.
6
Check the “CD-ROM drives” box and uncheck all other items. Click [Next].
n
The system may ask you to insert a Windows CD-ROM while it checks for the
driver. Specify the “USBdrv2k_” directory of the CD-ROM drive (such as
D:\USBdrv2k_\) and continue the installation.
7
When the installation is complete, the system displays “Completing the
Found New Hardware Wizard.” Click [Finish].
n
Some computers may take about ten seconds to show this screen after the
installation is complete.
8
Restart the computer.
The driver has been installed.
Installing the driver on Windows XP
1
Start the computer.
2
Select [Start]
[Control Panel].
If the control panel appears as “Pick a category”, click “Switch to Classic
View” in the upper left of the window.
All control panels and icons will be displayed.
3
Go to [System]
[Hardware]
[Driver Signing]
[File Signature
Verification], and check the radio button to the left of “Ignore -Install all
files, regardless of file signature” and click [OK].
4
Click the [OK] button to close System Properties, and then click “X” in the
upper right of the window to close the Control Panel.
5
Insert the included CD-ROM into the CD-ROM drive.
6
First, make sure the POWER switch on the MOTIF ES is set to OFF, then
use a USB cable to connect the USB connector of the computer (or the USB
hub) to the USB TO HOST connector of the MOTIF ES. When the MOTIF
ES is turned on, the computer automatically displays the “Found New
Hardware Wizard.”
n
Some computers may take a few minutes to show this screen.
7
Check the radio button to the left of “Install the software automatically
(Recommended).” Click [Next].
The system starts the installation.
8
When the installation is complete, the system displays “Completing the
Found New Hardware Wizard.” Click [Finish].
n
Some computers may take about a few minutes to show this screen after the
installation is complete.
9
Restart the computer.
The driver has been installed.
SQ01 V2
In the procedure of installing the SQ01 V2, you can also install the Voice Editor
for MOTIF ES 6/7/8, Multi Part Editor for MOTIF ES 6/7/8, and Wave Editor
TWE together as plug-in software of the SQ01 V2.
1 Double-click on the “SQ01_” folder.
Various files including “setup.exe” will be displayed.
2 Double-click on “Setup.exe.”
SQ01 Setup Dialog box will be displayed.
3 Execute the installation by following the directions appearing on the screen.
After the installation, select “Restart”. After restarting Windows, you will
find the YAMAHA folder on your PC (Program Files as the default) and
SQ01 folder in the YAMAHA folder.
Refer to the online manuals for instructions on how to use the application.
SQ01 V2 MIDI Setup
1 Start the SQ01 V2.
Choose [Programs] from the [Start] menu, then select [YAMAHA
SQ01 Ver.2.0] [SQ01].
2 From the [Setup] menu (Track View window), select [MIDI]
[Device], to call up the “Device” page of the “MIDI” dialog.
3 Select the appropriate output port (for example, “YAMAHA USB
OUT 0-1”) in the [OUT] box, to use the USB connection with the
MOTIF ES.
4 Select the appropriate input port (for example, “YAMAHA USB IN
0-1”) in the [IN] box, then click [OK] to close the dialog box.
n
You can select the audio driver and the audio in/out device if necessary. From the
[Setup] menu, select [Audio]
[Device] to call up the “Device” page of the
“Audio” dialog.
nThe USB connection to the MOTIF ES can only be used for transfer of MIDI data.
No audio data can be transferred via USB.
Voice Editor and Multi Part Editor
Once you‘ve installed these software programs, you can use your computer to
edit the Voices and Mixing settings of the MOTIF ES.
1 Double-click on the “Tools” folder in the CD-ROM.
The “VEMOTES_” and “MEMOTES_” folders will be displayed.
2 Double-click on the “VEMOTES_” folder or “MEMOTES_” folder.
“setup.exe” file will be displayed.
3 Double-click on the “setup.exe” file.
The Voice Editor or the Multi Part Editor Tools setup dialog will be
displayed.
4 Execute the installation by following the on-screen directions.
For details, refer to the each on-line Help or the each PDF owner’s manual.
TWE (using as a stand-alone software)
In the procedure of installing the SQ01 V2, you can also install the TWE, which
enables you to edit the wave data directly on your computer, as plug-in software
of the SQ01 V2. If you wish to install the TWE alone, follow the instructions
below.
1 Double-click on the “Twe_” folder.
2 Select the language that you want to use and double-click “setup.exe”.
3 Execute the installation by following the on-screen instructions.
For details on operation, refer to the PDF manual provided in the folder.
English
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha MOTIF ES7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha MOTIF ES7 in the language / languages: German as an attachment in your email.

The manual is 1,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha MOTIF ES7

Yamaha MOTIF ES7 Installation Guide - English - 35 pages

Yamaha MOTIF ES7 User Manual - English - 300 pages

Yamaha MOTIF ES7 User Manual - German - 300 pages

Yamaha MOTIF ES7 User Manual - Dutch - 300 pages

Yamaha MOTIF ES7 User Manual - French - 300 pages

Yamaha MOTIF ES7 Installation Guide - French - 35 pages

Yamaha MOTIF ES7 User Manual - Italian - 308 pages

Yamaha MOTIF ES7 Installation Guide - Italian - 12 pages

Yamaha MOTIF ES7 User Manual - Portuguese - 300 pages

Yamaha MOTIF ES7 User Manual - Spanish - 297 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info