The Master Job mode contains two convenient operations (called “Jobs”) — one letting you initialize (reset) the Master data, and the other letting
you transmit your edited Master data to an external MIDI device or computer.
After setting parameters as required from the selected display, press the [ENTER] button to execute the Job.
MW (Modulation Wheel)Determines whether or not to transmit MIDI messages generated by using the Modulation Wheel to the internal and
external tone generator.
RB (Ribbon Controller)Determines whether or not to transmit MIDI messages generated by using the Ribbon Controller to the internal and
external tone generator.
ChAT (Channel Aftertouch)Determines whether or not to transmit Channel Aftertouch messages generated by pressing the keys to the internal
and external tone generator.
FC1 (Foot Controller1)
FC2 (Foot Controller2)Determines whether or not to transmit MIDI messages generated by pressing the optional Foot Controller to the
internal and external tone generator.
Sus (Sustain)Determines whether or not to transmit Sustain messages generated by pressing the Footswitch connected to the
SUSTAIN jack to the internal and external tone generator.
FS (Footswitch)Determines whether or not to transmit MIDI messages generated by pressing the Footswitch connected to the
ASSIGNABLE jack to the internal and external tone generator.
KnobDetermines whether or not to transmit MIDI messages generated by using the Knobs to the internal and external
tone generator.
SliderDetermines whether or not to transmit MIDI messages generated by using the Sliders to the internal and external
tone generator.
BC (Breath Controller)Determines whether or not to transmit MIDI messages generated by using the Breath controller connected to the
BREATH connector to the internal and external tone generator.
Vol (Volume)Determines whether or not to transmit Volume messages to the internal and external tone generator.
PanDetermines whether or not to transmit Pan messages to the internal and external tone generator.
[F4] PRESET
From this display you can make the Voice-related settings for each Zone, in the selected Master program number. In this way, selecting a different Master
automatically calls up a completely different set of Voices and Voice-related settings for the four Zones.
BankMSB,
BankLSB,
PgmChange (Program Change)
Determines the Voice assignment for each Zone in the selected Master.
Settings:Refer to the Voice List in the separate Data List booklet.
VolumeDetermines the output level of the Voice in each Zone.
Settings:0 ~ 127
PanDetermines the stereo pan position of the Voice in each Zone.
Settings:L64 (Left) ~ C (Center) ~ R63 (Right)
[F5] KN/CS (Knob/Control Slider)
From this display you can determine which Control Change numbers are used for the Knobs and Sliders for each Zone. These settings are available only when the
Knob/Slider parameter (in the [F2] OTHER display in Common Edit) is set to “zone.”
Settings:off, 1~95
Master Job mode[MASTER] → [JOB]
[F1] INIT (Initialize)
This function lets you reset (initialize) all Master parameters to their default settings. It also allows you to selectively initialize certain parameters, such as Common
settings, settings for each Zone, and so on — very useful when creating a completely new Master from scratch.
Parameter Types (for Initializing): All, Common, Zone
ALLAll settings for the selected Master are initialized.
CommonCommon parameter settings for the selected Master are initialized.
ZoneYou can initialize the Zone setting to one of the following three types.
Split
Splits the keyboard range using Zone 1 and Zone 2. “UpperCh” determines the MIDI transmit channel of the upper range of the keyboard, “LowerCh” determines
the MIDI transmit channel of the lower range of the keyboard, and “SplitPoint” determines the note (C2 ~ G8) number which separates the upper range and lower
range of the keyboard.
4ZoneInitializes all four Zones.
LayerLets you layer two parts using Zone 1 and Zone 2. “UpperCh” and “LowerCh” determine the MIDI transmit channels of the two Zones respectively.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Yamaha MOTIF ES7 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Yamaha MOTIF ES7 in the language / languages: English as an attachment in your email.
The manual is 8,4 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
