Patterns consist of the following three types of data:
• MIDI sequence data (created in the Pattern Record mode, Pattern Edit mode, and Pattern Job mode)
• Setup data (created in the Pattern Play mode)
• Mixing data (created in the Pattern Mixing mode/Mixing Edit mode and stored in the Pattern Mixing Store mode)
After creating the data in these modes described above, store the Mixing settings in the Pattern Mixing Store mode to archive it as Pattern data
and save the entire Pattern to the SmartMedia/USB storage device in the File mode.
nNon-note MIDI events (such as Voice number, volume, pan, and effect send level) which are necessary at the start of a Pattern are not recorded as MIDI
sequence data, but are stored instead as Mixing data.
Because Pattern data (MIDI sequence data, Setup data, and Mixing data) is recorded to DRAM (page 187), it will be lost when turning the power off. Make
sure to save any Pattern data created via the Record, Edit, Job, and Mixing setting to the SmartMedia/USB storage device in the File mode before turning
the power off. For details on saving Pattern data, see page 132.
Pattern Play mode[PATTERN] → Pattern selection
[F1] PLAYRefer to page 56 in the Quick Guide section.
Trans (Transpose)Determines the key transpose setting for the Pattern, and can be adjusted in semitones.
Settings:-36 ~ +36
nIf Transpose is applied to a Drum Voice, the results may not be musically appropriate. To ensure proper playback of a Drum
Voice, set the Note Shift parameter for the Drum Voice Part to an appropriate value ([PATTERN] → [MIXING] → [EDIT] → Part
selection → [F4] TONE → [SF1] TUNE → NoteShift).
MEAS (Measure)Indicates the current measure number and beat for the current Pattern. During playback, this indication changes
automatically according to the Pattern playback. You can input the desired measure number directly by using the
Number Input window called up via the [INFORMATION] button.
[SF1] ARP1 (Arpeggio 1) - [SF5]
ARP5 (Arpeggio 5)
You can register the desired Arpeggio types to these buttons and call them up any time during your keyboard
performance.
[F2] GROOVE (Grid Groove)
Same as in the Song Play mode. See page 221.
[F3] TRACK
[SF1] CHANNELSame as in the Song Play mode. See page 221.
[SF2] OUT SW (Output Switch)Same as in the Song Play mode. See page 222.
[SF3] TR VCE (Track Voice)Determines whether the program change data contained in the phrase data is effective or not. For most purposes,
this should be set to “off.” For example, if a phrase has embedded Voice changes (program change messages) but
you don’t want the Voice to change in the middle of the phrase, set this to “off.” Tracks that are set to “off” here
automatically play back with the Voice number assigned to the Part set in the Mixing mode.
nThe Phrase Voice embedded in the Phrase can be specified from the Voice display in the Pattern Record mode (page 243).
[F4] PATCHRefer to page 113 in the Quick Guide section.
From this display, you can assign a Preset phrase or a User phrase (recorded in the Pattern Record mode) to each track and create a Pattern that contains up to
16 tracks.
nThe Patch function allows you to use only User phrases recorded to a track of the currently selected Pattern. If you wish to use User phrases recorded to tracks of other Patterns,
use the Phrase Data Copy function, selected with [SF5] button.
SectionShows the current edited section. For details about how to change sections, see page 57.
MeasShows Measure : Beat for current playback location.
[SF4] CLEARThis clears the Phrase assignment to the currently selected track and leaves the track empty.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Yamaha MOTIF ES7 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Yamaha MOTIF ES7 in the language / languages: English as an attachment in your email.
The manual is 8,4 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
