571272
227
Zoom out
Zoom in
Previous page
1/300
Next page
Reference Song Mode
Song Job mode
227
Owner’s Manual
nBefore executing the Note data Job, make sure that you specify the track (01~16, all) and range (measure : beat : clock) to which the Job is applied.
01: Quantize Quantization is the process of adjusting the timing of note events by moving them closer to the nearest exact beat.
You can use this feature, for example, to improve the timing of a performance recorded in real time.
TR (Track)
001 : 1 : 000 - 999 : 4 : 479 Determines the track (01-16, all) and range of measures/beats/clocks over which the Job is applied.
Quantize (Resolution) Determines to what beats the note data in the specified track will be aligned.
Settings: 32nd note, 16th note triplet, 16th note, 8th note triplet, 8th note, 1/4 note triplet, 1/4 note, 16th note + 16th note triplet, 8th note
+ 8th note triplet
Strength The Strength value sets the “strength” by which note events are pulled toward the nearest quantize beats. A setting
of 100% produces exact timing. A setting of 0% results in no quantization.
Settings: 000%~100%
SwingRate Delays notes on even-numbered beats (backbeats) to produce a swing feel.
For example, if the meter is 4/4 and the quantize value is quarter notes, the 2nd and 4th beats of the measure will be
delayed. When a triplet quantize value is used, the last note of each triplet is delayed. When the quantize value is
even-numbered, beats will be delayed.
Settings: See below.
If the quantize value is 1/4 note, 8th note, 16th note, 32nd note: 50%~75%
A setting of 100% is equivalent to twice the length of the specified quantize value. A setting of 50% produces exact timing and
therefore no swing feel. Settings above 51% increase the amount of swing, with 75% being equivalent to a dotted-note delay.
If the quantize value is 1/4 note triplet, 8th note triplet, 16th note triplet: 66%~83%
A setting of 100% is equivalent to three times the length of the specified quantize value. A setting of 66% produces exact
timing and therefore no swing feel. Settings above 67% increase the amount of swing, with 83% being equivalent to a
sextuplet delay.
If the quantize value is 8th note + 8th note triplet, 16th note + 16th note triplet: 50%~66%
A setting of 100% is equivalent to twice the length of a 8th note or 16th note. A setting of 50% produces exact timing and
therefore no swing feel. Settings above 51% increase the amount of swing, with 66% being equivalent to a triplet delay.
nIf a swing value other than 100% results in notes being positioned after other non-swing notes, the latter notes are delayed
accordingly.
GateTime Determines the gate time (the length of time a note sounds) of the even-numbered backbeat notes to enhance the
swing feel. When a triplet quantize value is used, the gate time of the last note of each triplet is adjusted.
When the quantize value is 8th note + 8th note triplet or 16th note + 16th note triplet, the gate time of the even-
numbered 8th note or 16th note beats will be adjusted. A setting of 100% leaves the original gate time unchanged.
If an adjusted gate time value is less than 1, the value is rounded off to 1.
Settings: 000%~200%
02: Modify Velocity This Job alters the velocity values of the specified range of notes, letting you selectively boost or cut the volume of
those notes. Velocity changes are calculated as follows:
Adjusted velocity = (original velocity x Rate) + Offset
If the result is 0 or less, the value is set to 1. If the result is higher than 127, the value is set to 127.
TR (Track)
001 : 1 : 000 - 999 : 4 : 479 Determines the track (01-16, all) and range of measures/beats/clocks over which the Job is applied.
SetAll Sets the velocities of all target notes to the same fixed value (1 to 127). When set to “off” the Set All parameter has no
effect. When set to a value other than “off” the Rate and Offset parameters are unavailable and appear as “***” on
the display.
Settings: off (0), 001~127
Rate Determines the percentage by which the target notes will be shifted from their original velocities.
Settings below 100% reduce the velocities, and settings above 100% increase the velocities proportionately. When
the Set All parameter is not “OFF” this parameter appears as “***” and cannot be changed.
Settings: 000% ~ 200%, ***
Offset Adds a fixed value to the Rate-adjusted velocity values. A setting of 0 produces no change. Settings below 0 reduce
the velocities, and settings above 0 increase the velocities. When the Set All parameter is not “OFF” this parameter
appears as “***” and cannot be changed.
Settings: -127 ~ +127, ***
03: Modify Gate Time This Job alters the gate times of the specified range of notes. Gate time changes are calculated as follows:
Adjusted gate time = (original gate time x Rate) + Offset
If the result is 0 or less, the value is rounded off to 1.
TR (Track)
001 : 1 : 000 - 999 : 4 : 479 Determines the track (01-16, all) and range of measures/beats/clocks over which the Job is applied.
SetAll Sets the gate times of all target notes to the same fixed value. When set to “off” the Set All parameter has no effect.
When set to a value other than “off,” the Rate and Offset parameters are unavailable and appear as “***” on the
display.
Settings: off (0), 0001 ~ 9999
227


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha MOTIF ES7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha MOTIF ES7 in the language / languages: English as an attachment in your email.

The manual is 8,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha MOTIF ES7

Yamaha MOTIF ES7 Installation Guide - English - 35 pages

Yamaha MOTIF ES7 Installation Guide - German - 35 pages

Yamaha MOTIF ES7 User Manual - German - 300 pages

Yamaha MOTIF ES7 User Manual - Dutch - 300 pages

Yamaha MOTIF ES7 User Manual - French - 300 pages

Yamaha MOTIF ES7 Installation Guide - French - 35 pages

Yamaha MOTIF ES7 User Manual - Italian - 308 pages

Yamaha MOTIF ES7 Installation Guide - Italian - 12 pages

Yamaha MOTIF ES7 User Manual - Portuguese - 300 pages

Yamaha MOTIF ES7 User Manual - Spanish - 297 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info