571272
213
Zoom out
Zoom in
Previous page
1/300
Next page
Reference Performance Mode
Performance Edit mode Common Edit
213
Owner’s Manual
Voice Edit parameters are divided into Common Edit (parameters common to all four Parts), and Part Edit (parameters of individual Parts).
[F5] EG (Envelope Generator)
This display contains the basic EG settings, both volume and filter, for the Performance, as well as the filter’s cutoff frequency and resonance settings. The settings
made here are applied as offsets to the AEG and FEG settings in the Performance Edit mode (pages 218, 219).
The parameters are same as in Voice Play mode. See page 189.
[F6] ARP (Arpeggio)
This display contains the basic settings for Arpeggio playback, including Type and Tempo. Note that the Performance mode lets you independently enable or
disable Arpeggio playback for each Part.
The parameters are same as in the Voice Play mode (page 189) except for the following one.
PartSw Determines whether Arpeggio is on or off for the selected Part. The Parts for which boxes are checkmarked are
enabled for Arpeggio play.
Performance Edit mode [PERFORM] Performance selection [EDIT]
Common Edit [PERFORM] Performance selection [EDIT] [COMMON]
[F1] GENERAL
[SF1] NAME From this display you can assign the category (sub and main) of the selected Performance, and create a name for
the Performance. The Performance name can contain up to 10 characters. For detailed instructions on naming a
Performance, see “Basic Operation” on page 53.
[SF3] MEQ OFS
(Master EQ Offset)
From this display you can adjust the master (global) EQ settings for all Parts of the selected Performance. The level
of each of the four bands (with the exception of “MID”) can be adjusted. Moreover, you can also tweak these settings
directly from the four Knobs on the front panel. Editing by Knobs can be done in the Performance Play mode.
Settings: -64 ~ 0 ~+63
[SF4] PORTA (Portamento) This display allows you to set the Portamento related parameters.
The parameters are the same as in the Performance Play mode. See page 212.
[SF5] OTHER From this display you can set the control functions for the Knobs and related parameters.
With the exception of Pitch Bend, which cannot be set here, these parameters are the same as in the Voice Edit
mode (page 190).
[F2] OUT/MEF (Output/Master Effect)
[SF1] OUT (Output)
Volume Determines the output level of the selected Performance. You can adjust the overall volume, keeping the balance
between all Parts.
Settings: 0 ~ 127
Pan Determines the stereo pan position of the selected Performance. This parameter offsets the same parameter in the
Part Edit setting. You can also adjust this parameter using the PAN knob (with the [PAN/SEND] lamp turned on) on
the front panel. Editing by using the Knobs can be done also in the Performance Play mode.
Settings: L63 (Left) ~ C (Center) ~ R63 (Right)
nA setting of “C” (center) maintains the individual Pan settings of each Part.
RevSend Determines the Send level of the signal sent from Insertion Effect A/B (or the bypassed signal) to the Reverb effect.
You can also adjust this parameter using the REVERB knob (with the [PAN/SEND] lamp turned on) on the front panel.
Editing by using the Knobs can be done also in the Performance Play mode.
Settings: 0 ~ 127
ChoSend Determines the Send level of the signal sent from Insertion Effect A/B (or the bypassed signal) to the Chorus effect.
You can also adjust this parameter using the [CHORUS] knob (with the [PAN/SEND] lamp turned on) on the front
panel. Editing by using the Knobs can be done also in the Performance Play mode.
Settings: 0 ~127
nFor details on Effect connections in the Performance mode, see page 179.
213


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha MOTIF ES7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha MOTIF ES7 in the language / languages: English as an attachment in your email.

The manual is 8,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha MOTIF ES7

Yamaha MOTIF ES7 Installation Guide - English - 35 pages

Yamaha MOTIF ES7 Installation Guide - German - 35 pages

Yamaha MOTIF ES7 User Manual - German - 300 pages

Yamaha MOTIF ES7 User Manual - Dutch - 300 pages

Yamaha MOTIF ES7 User Manual - French - 300 pages

Yamaha MOTIF ES7 Installation Guide - French - 35 pages

Yamaha MOTIF ES7 User Manual - Italian - 308 pages

Yamaha MOTIF ES7 Installation Guide - Italian - 12 pages

Yamaha MOTIF ES7 User Manual - Portuguese - 300 pages

Yamaha MOTIF ES7 User Manual - Spanish - 297 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info