From this display you can make various time and level settings for the Pitch EG, which determine how the pitch of the Plug-in Voice changes over time.
The full names of the available parameters are shown in the chart below, as they appear in the display.
[F3] FILTER
HPFCutoff (High Pass Filter
Cutoff frequency)Determines the Cutoff frequency for the High Pass Filter.
Settings:-64 ~ 0 ~ +63
[F4] NATIVE
With a Plug-in board installed to this synthesizer, you can create a Plug-in Voice by editing both native parameters (those parameters exclusive to the particular
board) and unique parameters (related specifically to this synthesizer).
Pressing [F4] gives you access to the native parameters of the Plug-in board. The parameters will vary depending on the Plug-in Board. For details about each
parameter and its functions, refer to the Owner’s Manual or the on-line help that came with your Plug-in Board.
[F5] LFO (Low Frequency Oscillator)
From this display you can set the basic LFO parameters for modulating the pitch to create vibrato and other special effects.
SpeedDetermines the speed of the LFO waveform. Positive settings increase the speed and negative settings decrease it.
Settings:-64 ~ 0 ~ +63
DelayDetermines the delay time between the moment you press note on the keyboard and the moment the LFO comes
into effect. Positive settings lengthen the delay and negative settings shorten it.
Settings:-64 ~ 0 ~ +63
PMod (Pitch Modulation Depth)Determines the amount by which the LFO waveform controls the pitch. Positive settings increase the amount and
negative settings decrease it.
Settings:-64 ~ 0 ~ +63
[F6] EQ (Equalizer)
From this display you can apply equalizer settings to the Plug-in Voice. This is a shelving equalizer with
two bands; one for high frequencies and the other for low frequencies.
nFor details on the EQ, see page 178.
LowFreq (Low Frequency)Determines the shelving point for the low frequencies. The levels of signals below this frequency will be boosted/
attenuated by the amount set in the LowGain parameter.
Settings:32Hz ~ 2.0kHz
LowGain (Low Gain)Determines the amount by which signals below the LowFreq frequency will be boosted/attenuated.
Settings:-64 ~ 0 ~ +63
HighFreq (High Frequency)Determines the shelving point for the high frequencies. The levels of signals above this frequency will be boosted/
attenuated by the amount set in the HighGain parameter.
Settings:500Hz ~ 16.0kHz
HighGain (High Gain)Determines the amount by which signals above the HighFreq frequency will be boosted/attenuated.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Yamaha MOTIF ES7 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Yamaha MOTIF ES7 in the language / languages: English as an attachment in your email.
The manual is 8,4 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.