571272
203
Zoom out
Zoom in
Previous page
1/300
Next page
Reference Voice Mode
Voice Edit mode Drum Voice Edit Key Edit
203
Owner’s Manual
Category Determines the Category of the Wave/Normal Voice. If you switch to another Category, the first Wave/Normal Voice in
that Category will be selected.
nFor more information about the Categories, refer to the separate Data List booklet.
[SF2] OUTPUT From this display you can set certain output parameters for the selected Drum key.
InsEFOut
(Insertion Effect Output) Determines which Insertion effect (A or B) is used to process each individual Drum key. The “thru” setting lets you
bypass the Insertion effects for the specific key.
Settings: thru, insA (Insertion Effect A), insB (Insertion Effect B)
RevSend (Reverb Send) Determines the level of the Drum key sound (the bypassed signal) that is sent to Reverb effect. A setting of “0”
results in no Reverb processing of the Drum key sound. This is available only when Insertion Effect Output (above) is
set to “thru.”
Settings: 0 ~ 127
ChoSend (Chorus Send) Determines the level of the Drum key sound (the bypassed signal) that is sent to Chorus effect. A setting of “0”
results in no Chorus processing of the Drum key sound. This is available only when Insertion Effect Output (above) is
set to “thru.”
Settings: 0 ~ 127
OutputSel (Output Select) Determines the specific output(s) for the individual Drum key signal. You can assign each individual Drum key sound
to be output from a specific hardware output jack on the rear panel. This is available only when Insertion Effect
Output (above) is set to “thru.”
Settings: See page 31.
[SF5] OTHER From this display you can set various parameters related to how the individual notes of the Drum voice respond to
the keyboard and MIDI data.
AssignMode When this is set to “single,” double playback of the same note is prevented. This is useful when two or more
instances of the same note are received nearly simultaneously, or without a corresponding note off message. To
allow playback of each instance of the same note, set this to “multi.”
Settings: single, multi
RcvNoteOff (Receive Note Off) Determines whether or not the selected Drum key responds to MIDI Note Off messages.
Settings: off, on
nThis parameter is available when the Type is set to “pre wav” or “usr wav” in the [F1] OSC [SF1] WAVE display (page 202).
AlternateGroup Set the Alternate Group to which the key is assigned. In a real drum kit, some drum sounds cannot physically be
played simultaneously, such as open and closed hi-hats.You can prevent keys from playing back simultaneously by
assigning them to the same Alternate Group. Up to 127 Alternate Groups can be defined. You can also select “off”
here if you wish to allow the simultaneous playback of sounds.
Settings: off, 1 ~ 127
[F2] PITCH
[SF1] TUNE From this display you can set various pitch-related parameters for the selected key.
Coarse Determines the pitch of each Drum Key Wave (or Normal Voice) in semitones.
Settings: -48 ~ +48
n
If a Normal voice has been assigned to the key, this parameter adjusts the position of its note (not its pitch) relative to note C3.
Fine Determines the fine tuning for the pitch of each Drum Key Wave (or Normal Voice).
Settings: -64 ~ +63
[SF2] VEL SENS
(Velocity Sensitivity)
Pitch Determines how the pitch of the selected Drum key responds to velocity. For positive values, the more strongly you
play the key, the higher the pitch becomes. For negative values, the more strongly you play the key, the lower the
pitch.
Settings: -64 ~ +63
[F3] FILTER
[SF1] CUTOFF This synthesizer lets you apply a low pass filter and high pass filter to each individual Drum key — giving you
exceptionally detailed and comprehensive sonic control over the Drum voice.
Settings: This parameter is available when the Type is set to “pre wav” or “usr wav” in the [F1] OSC [SF1] WAVE display (page 202).
LPFCutoff Determines the Cutoff frequency of the Low Pass Filter.
Settings: 0 ~ 255
LPFReso Determines the amount of Resonance (harmonic emphasis) applied to the signal at the Cutoff frequency.
Settings: 0 ~ 127
HPFCutoff Determines the Cutoff frequency of the High Pass Filter.
Settings: 0 ~ 255
203


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha MOTIF ES7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha MOTIF ES7 in the language / languages: English as an attachment in your email.

The manual is 8,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha MOTIF ES7

Yamaha MOTIF ES7 Installation Guide - English - 35 pages

Yamaha MOTIF ES7 Installation Guide - German - 35 pages

Yamaha MOTIF ES7 User Manual - German - 300 pages

Yamaha MOTIF ES7 User Manual - Dutch - 300 pages

Yamaha MOTIF ES7 User Manual - French - 300 pages

Yamaha MOTIF ES7 Installation Guide - French - 35 pages

Yamaha MOTIF ES7 User Manual - Italian - 308 pages

Yamaha MOTIF ES7 Installation Guide - Italian - 12 pages

Yamaha MOTIF ES7 User Manual - Portuguese - 300 pages

Yamaha MOTIF ES7 User Manual - Spanish - 297 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info