571272
119
Zoom out
Zoom in
Previous page
1/300
Next page
Quick Guide — Advanced Course
Creating a Song on the MOTIF ES
119
Owner’s Manual
Re-recording a specific part of a Song (Punch In/Out)
Use the Punch In/Out recording method to record over only a
specific portion of the track. In the example instructions
below, you’ll see how to re-record measures three through five
of an already recorded Song.
Set the Type parameter to “punch” and specify the area to be
re-recorded.
Set other parameters as necessary. See page 222 for details.
nPunch In/Out recording is available only in the Song Record mode.
This is not available in the Pattern Record mode.
Recording additional notes to an already-
recorded track (Overdub)
Use the Overdub recording method when you want to add
more data to a track that already contains data. This is useful
not only for recording more notes to a track; it’s also
convenient for adding non-note, sound-shaping data, such as
that of the Knobs and Ribbon Controller.
Set the Type parameter to “overdub.”
Set other parameters as necessary. See page 222 for details.
Playback starts, and the notes (or controller data) you play
are added to the existing data.
1
In the Song Play mode, select a Song to be created.
2Press the [] (Record) button to enter the Song
Record mode.
3Press the [TRACK SELECT] button (the lamp
lights), then select the desired track from the
number buttons [1] - [16].
4Set the parameters related to recording in the
[F1] SETUP display.
5Press the [F] (Play) button to start recording.
6Press the [] (Stop) button to stop recording
after the Song playback reaches the Punch Out
point.
7Press the [F] (Play) button to hear the part
you’ve just re-recorded.
Punch In (Recording start measure : beat)
Playback of the recording track is turned off from this point, and
your keyboard performance will be recorded to the track. Location setting
(page 58)
Punch Out (Recording end measure : beat)
Recording ends at this point and normal playback of the
recording track starts.
Press the [SF1] COPY LOC to assign the measure numbers registered to
the Locations (Loc1 and Loc2) to the Punch In and Punch Out points.
SEQ TRANSPORT
LOCATE 1 2
When Song playback
reaches the Punch In
point, play the keyboard.
Playback start
8Save the created Song data to a SmartMedia/USB
storage device (page 132) before turning the
power off.
1In the Song Play mode, select a song to be
created.
2Press the [] (Record) button to enter the Song
Record mode.
3Press the [TRACK SELECT] button (the lamp
lights), then select the desired track from the
number buttons [1] - [16].
4Set the parameters related to recording in the
[F1] SETUP display.
5Press the [F] (Play) button to start recording.
6Press the [] (Stop) button to stop recording
after the Song playback reaches the Punch Out
point.
7Press the [F] (Play) button to hear the part
you’ve just re-recorded.
8Save the created Song data to a SmartMedia/USB
storage device (page 132) before turning the
power off.
119


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha MOTIF ES7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha MOTIF ES7 in the language / languages: English as an attachment in your email.

The manual is 8,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha MOTIF ES7

Yamaha MOTIF ES7 Installation Guide - English - 35 pages

Yamaha MOTIF ES7 Installation Guide - German - 35 pages

Yamaha MOTIF ES7 User Manual - German - 300 pages

Yamaha MOTIF ES7 User Manual - Dutch - 300 pages

Yamaha MOTIF ES7 User Manual - French - 300 pages

Yamaha MOTIF ES7 Installation Guide - French - 35 pages

Yamaha MOTIF ES7 User Manual - Italian - 308 pages

Yamaha MOTIF ES7 Installation Guide - Italian - 12 pages

Yamaha MOTIF ES7 User Manual - Portuguese - 300 pages

Yamaha MOTIF ES7 User Manual - Spanish - 297 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info