571272
97
Zoom out
Zoom in
Previous page
1/300
Next page
Quick Guide — Advanced Course
Creating a Voice by using the Sampling function
97
Owner’s Manual
Assign the Samples obtained via the Sampling function to specific Key Ranges to create a Waveform. Because the Waveform data
including Samples which resides temporarily in DIMM (page 187) is lost when the power is turned off, you should always save the
Waveform data or Samples to a SmartMedia/USB storage device before turning off the power. The following four methods can be used to
save a Sample that is assigned to a Waveform. Execute the Save operation in the File mode.
While the data is being saved, make sure to follow these precautions:
•Never remove or eject the media from the device (SmartMedia or USB storage).
•Never unplug or disconnect any of the devices.
•Never turn off the power of the MOTIF ES or the relevant devices.
Saving as a User Voice
When you save a User Voice that contains Samples, all the
related data — the Waveform assigned to the Voice, the
Samples assigned to the Waveform, as well as the User Voice
itself — is automatically saved together. Insert a SmartMedia
into the CARD slot or connecting the USB storage device to
this synthesizer, and follow the instructions below.
1Press the [FILE] button to enter the File mode, then
execute the basic settings.
Refer to “Basic settings for using SmartMedia or a USB
storage device” on page 30.
2Press the [F2] SAVE button to call up the Save display.
3Set the TYPE parameter to “All” or “AllVoice.
When “All” is selected, execute the Save operation to save
all the created data including the User Voices as a single
file. When “AllVoice” is selected, execute the Save
operation to save all User Voices, including Waveforms
assigned to Normal Voice Elements or Drum Voice Keys, as
a single file.
4Input a file name.
Move the cursor to the file name input location, then input a
file name. For detailed instructions on naming, refer to page
53 in the Basic Operation section.
5Press the [ENTER] button to execute the Save
operation.
If you are about to overwrite an existing file, the display
prompts you for confirmation. Press the [INC/YES] button to
execute the Save operation to overwrite the existing file, or
press the [DEC/NO] button to cancel it.
Saving as a Waveform
When you save a Waveform that makes up a Voice, all the
Samples that are assigned to the Waveform are automatically
saved together. The procedure for saving is the same as
described in “Saving a User Voice” above, with the exception
that Type is set to “AllWaveform” in step #3.
Saving as a WAV file
You can select a specific Sample from a Waveform and save it
as a WAV file (Windows audio format). Insert a SmartMedia into
the CARD slot or connecting the USB storage device to this
synthesizer, and follow the instructions below.
1Select a Voice containing the Sample to be saved in the
Voice Play mode, then press the [FILE] button to enter
the File mode, and execute the basic settings.
Refer to “Basic settings for using SmartMedia or a USB
storage device” on page 30.
2
Set the TYPE parameter to “Wav” in the [F2] SAVE display.
3Input a file name.
Move the cursor to the file name input location, then input a file
name. For detailed instructions on naming, refer to page 53 in
the Basic Operation section.
4Press the [ENTER] button, then select a Sample to be saved.
When a Normal Voice is selected in step #1:
Specify the Element and Key Bank to call up the Sample
assigned to the selected Voice. You can hear the Sample by
pressing the [SF1] AUDITION button. Go through the Samples
in this way to find the desired Sample.
When a Drum Voice is selected in step #1:
Specify the Note and Key Bank to call up the Sample assigned
to the selected Drum Voice. You can hear the Sample by
pressing the [SF1] AUDITION button. Go through the Samples
in this way to find the desired Sample.
5Press the [ENTER] button to execute the Save operation.
If you are about to overwrite an existing file, the display prompts
you for confirmation. Press the [INC/YES] button to execute the
Save operation and overwrite the existing file, or press the
[DEC/NO] button to cancel it.
Saving as a AIFF file
You can select a specific Sample from a Waveform and save it as a
AIFF file (Macintosh audio format). The procedure for saving is the
same as described in “Saving as a WAV file” above with the
exception that Type is set to “AIFF” in step #2.
Saving a Sample [FILE] [F2] SAVE
CAUTION
This is available only when the cursor is located at
the KeyBank. Each press of the [SF2] button calls up
a different Key Bank assigned to a specific velocity
range (for the same key).
You can hear the selected sample by
pressing the [SF1] button. (Audition function)
You can hear the selected sample by pressing
the [SF1] button. (Audition function)
97


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha MOTIF ES7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha MOTIF ES7 in the language / languages: English as an attachment in your email.

The manual is 8,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha MOTIF ES7

Yamaha MOTIF ES7 Installation Guide - English - 35 pages

Yamaha MOTIF ES7 Installation Guide - German - 35 pages

Yamaha MOTIF ES7 User Manual - German - 300 pages

Yamaha MOTIF ES7 User Manual - Dutch - 300 pages

Yamaha MOTIF ES7 User Manual - French - 300 pages

Yamaha MOTIF ES7 Installation Guide - French - 35 pages

Yamaha MOTIF ES7 User Manual - Italian - 308 pages

Yamaha MOTIF ES7 Installation Guide - Italian - 12 pages

Yamaha MOTIF ES7 User Manual - Portuguese - 300 pages

Yamaha MOTIF ES7 User Manual - Spanish - 297 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info