707383
49
Zoom out
Zoom in
Previous page
1/86
Next page
MONTAGE Owner’s Manual
39
You can record MIDI data as Songs on this instrument itself or record your performance (audio data) on a USB flash memory
device plugged into the MONTAGE.
Terminology
Song
A Song on this instrument is effectively the same as a song
on a MIDI sequencer, and playback automatically stops at
the end of the recorded data. The MONTAGE can store up to
64 Songs.
Track
This is a memory location on the sequencer where your
musical performances (made up of MIDI events) are stored.
The MONTAGE provides 16 tracks, which correspond to the
16 Mixing Parts.
Realtime Recording
The instrument records the performance data as it is played
along with a metronome. Realtime Recording features three
available methods: Replace, Overdub and Punch In/Out.
Replace lets you overwrite an already recorded Track with
new data, erasing the previously recorded data.
Overdub lets you add more data to a Track that already
contains data—in other words, recording new notes on top
of the previous ones.
Punch In/Out lets you re-record selectively over a specific
area of the Track.
MIDI Recording
This instrument features a Performance Recorder (built-in
multi Track sequencer) for recording your keyboard
performance as MIDI data. This function allows you to
instantly store your phrase which comes to your mind. You
can create full, complex multi-instrument arrangements and
complete Songs, using DAW.
Recording to a track
In this section, you’ll learn how to record your keyboard
performance, by recording a part to Track 1. However, you’ll
first need to set up the MONTAGE for recording.
1 Touch the [Play/Rec] tab in the left of the
Performance Play display.
The recording display appears.
2 Touch the [MIDI] tab in the left of the screen.
3 Press the [I] (Record) button.
The Record Setup display appears.
NOTE
Alternately, you can simply press the [I] (Record) button in the
Performance display, to perform Steps 1 – 3 at once.
1 Song name
2 Currently selected Performance name
3 Time Signature (Meter)
4 Position (starting position of Recording/Playback)
5 Quantize
6 Position corresponding to the entire sequence
7 Recorded time of the entire sequence
8 Playback on/off for each track
4 Set the following parameters on the Record
Setup display.
4-1 Move the cursor to Time Signature (Meter) (3), and then
set the value. For this example, set this to “4/4.”
4-2 Set Quantize to “240 (8th note)” in Record Quantize (5).
This convenient feature lets you automatically quantize (or
“clean up” the timing of) the notes in real time, as you
record. Quantize aligns the timing of note events to the
nearest beat. Normally, the smallest note value in the
notation (if you're playing from sheet music) should be set.
5 After completing recording setup, press the
[R] (Play) button to start recording.
Press the [R] (Play) button, then actually start recording
after the count-in.
6 When you’ve finished playing, press the [J]
(Stop) button to stop recording.
If you’ve played any wrong notes, press the [J] (Stop)
button, then try recording again.
Recording and Playback
1
3
4
7
5
6
8
2
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha Montage at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha Montage in the language / languages: English as an attachment in your email.

The manual is 14,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha Montage

Yamaha Montage User Manual - German - 80 pages

Yamaha Montage User Manual - Dutch - 80 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info