707383
22
Zoom out
Zoom in
Previous page
1/86
Next page
MONTAGE Owner’s Manual
12
Controls and Functions
Left side of Rear Panel
1 [STANDBY/ON] switch
Press to set the power to On or Standby.
2 [AC IN] (AC Power Cord Socket)
Plug the AC power cord supplied with this instrument.
3 [USB TO DEVICE] terminal
Used to connect this instrument to a USB flash memory
device. This lets you save data created on this instrument to
an external USB flash memory device and load data from a
USB flash memory device to the instrument. Save/Load
operations can be performed: [UTILITY] [Contents]
[Store/Save] or [Load].
NOTE
Only USB flash memory devices can be recognized by this
instrument. No other USB devices (such as a hard disk drive, CD-
ROM drive and USB hub) can be used.
The instrument supports the USB 1.1 to 3.0 standard. However,
note that the transfer speed differs depending on the data type
and the condition of this instrument.
4 [USB TO HOST] terminal
Used to connect this instrument to a computer via a USB
cable, and allows you to transfer MIDI data and audio data
between the devices. Unlike MIDI, USB can handle multiple
ports via a single cable (page 50). For information about
how the MONTAGE handles Ports, see page 50.
NOTE
Audio data sending capability for the instrument is a maximum
32 channels (16 stereo channels) at a sampling frequency of
44.1 KHz; or maximum 8 channels (4 stereo channels) for a
sampling frequency of 44.1 KHz to 192 KHz. Audio data receiving
capability is a maximum 6 channels (3 stereo channels).
Right side of Rear Panel
5 MIDI [IN], [OUT], [THRU] terminal
MIDI [IN] is for receiving control or performance data from
another MIDI device, such as an external sequencer, letting
you control this instrument from the connected separate
MIDI device.
MIDI [OUT] is for transmitting all control, performance and
playback data from this instrument to another MIDI device,
such as an external sequencer.
MIDI [THRU] is simply for redirecting any received MIDI data
(via MIDI [IN]) to connected devices, allowing convenient
chaining of additional MIDI instruments.
6 FOOT SWITCH [ASSIGNABLE]/[SUSTAIN]
jacks
For connection of an optional FC3/FC4/FC5 Footswitch to the
[SUSTAIN] jack and a FC4/FC5 Footswitch to the
[ASSIGNABLE] jack. When connected to the [SUSTAIN]
jack, the Footswitch controls sustain. When connected to
[ASSIGNABLE], it can control one of various assignable
functions.
NOTE
The term “FC3” in this Owner’s Manual refers collectively to the
FC3 and other footswitches compatible with the FC3, such as the
FC3A.
The term “FC4” in this Owner’s Manual refers collectively to the
FC4 and other footswitches compatible with the FC4 such as the
FC4A.
7 FOOT CONTROLLER [1]/[2] jacks
For connection of an optional foot controller (FC7, etc.). This
jack lets you continuously control one of various different
assignable functions for Part edit—such as volume, tone,
pitch, or other aspects of the sound (see the Reference
Manual PDF document).
8 ASSIGNABLE OUTPUT (BALANCED) [L] and
[R] jacks (TRS balanced output)
Line level audio signals are output from this instrument via
these TRS balanced outputs. These outputs are
independent of the main output (at the OUTPUT [L/MONO]/
[R] jacks below), and can be freely assigned to any of the
Drum Part keys or the Parts. This lets you route specific Parts
or sounds for processing with a favorite external effect unit.
The Parts which can be assigned to these jacks are as
follows:
Drum Part key to which the drum/percussion instrument is
assigned
Metronome (Click)
Any Part of a Performance*
* Includes Audio Input Part
For details, see the Reference Manual PDF document.
9 OUTPUT (BALANCED) [L/MONO] and [R]
jacks (TRS balanced output)
Line level audio signals are output via these TRS balanced
outputs. For monophonic output, use only the [L/MONO]
jack.
) [PHONES] (Headphone) jack
This standard stereo phones jack is for connection to a set of
stereo headphones. This jack outputs audio signals identical
to those from the OUTPUT [L/MONO] and [R] jacks.
! A/D INPUT [L/MONO]/[R] jacks
External audio signals can be input via these phone jacks
(1/4" mono phone plug). Various devices such as a
microphone, CD player or synthesizer can be connected to
these jacks and their audio input signal can be sounded as
the Audio Part.
In addition, you can use the special Vocoder feature by
connecting a microphone to this [L/MONO] jack and
inputting your Voice to the microphone.
You can also use the Envelope Follower and ABS (Audio
Beat Sync) features. Envelope Follower is a function for
detecting the volume envelope of the input signal waveform
and modifying sounds dynamically.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha Montage at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha Montage in the language / languages: English as an attachment in your email.

The manual is 14,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha Montage

Yamaha Montage User Manual - German - 80 pages

Yamaha Montage User Manual - Dutch - 80 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info