652605
56
Zoom out
Zoom in
Previous page
1/86
Next page
MONTAGE Owner’s Manual
46
Making Global System Settings
Turning the beep sound on/off
You can turn the beep sound (that confirms operations,
menu/parameter selection, etc.) on/off as follows.
1 Press the [UTILITY] button to call up the
Utility display, then touch [Settings] tab
[System] tab.
2 Set “Beep” to “ON” or “OFF” to turn the beep
on or off.
3 Press the [EXIT] button.
This stores the setting and returns to the previous
display.
Turning the flashing of the Super Knob
on/off
In the default setting, the Super Knob flashes at the current
beat. You can turn this flashing on/off as follows.
When the function is turned off, the Super Knob remains lit
continuously.
1 Press the [UTILITY] button to call up the
Utility display, then touch [Settings] tab
[System] tab.
2 Select “ON” or “OFF” in “Knob Flash” to turn
the flashing on or off.
Touch panel calibration
Calibration of the touch panel may be necessary if the touch
panel seems occasionally unresponsive of the response is
erratic.
1 Hold down the [UTILITY] button and press the
PART [COMMON] button.
The Utility display appears, with the [Calibrate Touch
Panel] selected.
2 Press the [ENTER] button.
3 A white square appears. Touch the square to
calibrate the touch panel, and continue with
subsequent white squares until the operation
is finished.
NOTE
Alternately, you can touch [UTILITY] [Settings] [System] to
call up the System setting display and touch [Calibrate Touch
Panel].
Changing the Master Tuning
You can adjust the tuning of the MONTAGE. This is useful
when playing in an ensemble to match the pitch of other
instruments which cannot be easily tuned (such as a piano).
1 Press the [UTILITY] button to call up the
Utility display, then touch [Settings] tab
[Sound] tab.
2 Select “Tune” and change the parameter by
using the Data dial.
In this example, we'll change the value from “440 Hz” to
“442 Hz.” Since the Tune parameter is actually adjusted
in cents (1 cent = 1/100th of a semitone), the
corresponding value in Hertz is shown at right. Turn the
data dial to change the value to “+8.0.” Use a tuner for
the more accurate tuning as necessary.
3 Press the [EXIT] button.
This stores the setting and returns to the previous
display.
Tune
56


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha Montage 8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha Montage 8 in the language / languages: English as an attachment in your email.

The manual is 14,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info