652604
67
Zoom out
Zoom in
Previous page
1/86
Next page
MONTAGE Owner’s Manual
57
Display Messages
No read/write authority to the file. Indicates that you do not have the authority to read/write the file.
Now initializing all data… Indicates this synthesizer is restoring the factory-programmed settings.
Now initializing… Indicates that the specified data is being initialized.
Now loading... Indicates that a file is being loaded.
Now receiving MIDI bulk data... Indicates this synthesizer is receiving MIDI bulk data.
Now saving... Indicates that a file is being saved.
Now transmitting MIDI bulk data... Indicates this synthesizer is transmitting MIDI bulk data.
Please connect USB device. Connect the USB device to the [USB TO DEVICE] terminal for audio recording.
Please keep power on. The data is being written to Flash ROM. Never attempt to turn off the power while
data is being written to Flash ROM. Turning the power off while this message is
shown results in loss of all user data and may cause the system to freeze (due to
corruption of data in the Flash ROM). This may also result in the MONTAGE being
unable to properly start up the next time the power is turned on.
Please reboot to enable the new Audio I/O Mode. Please reboot this synthesizer to activate the change of the input/output settings
for audio data.
Please reboot to maintain internal memory. Please reboot this synthesizer to restore the internal memory.
Please stop audio play/rec. The operation you have attempted to execute cannot be done during audio
recording or playback.
Please stop sequencer. The operation you have attempted to execute cannot be done during Song
playback.
Please wait… Indicates this synthesizer is executing the specified operation.
Recall latest edits. If you are editing a Performance and select a different Performance without
storing your edited one, all the edits you’ve made will be erased. If this happens,
you can use Recall to restore the Performance with your latest edits intact.
Redo last recording. Confirms whether you want to redo the operation you have undone.
Sample is protected. The sample data cannot be overwritten.
Sample is too long. The Sample size is too large and the Load operation cannot be executed.
Sample memory full. The Sample memory is full and further Load operations cannot be executed.
Scene stored. The Scene has been stored to one of the [SCENE] buttons.
Song data overload. The Song size is too large for playback.
Song full. The maximum overall number of Songs has been exceeded when executing the
related operations.
Touch the white square. This message appears when you need to touch the displayed white rectangle
during touch panel calibration.
Turn on Memory Switch to memorize ** into this
scene.
When the [Memory] (Memory Switch) is turned on for the function, the
corresponding function information is automatically stored in the currently
selected [SCENE] button.
Undo last recording. Confirms whether you want to undo the most recent recording.
Unsupported USB device. This message appears when an unsupported USB device has been connected.
USB connection terminated. A break in the connection with the USB flash memory device has occurred
because of an abnormal electric current. Disconnect the USB flash memory
device from the [USB TO DEVICE] terminal, and then press any of the panel
buttons.
USB device is full. The USB flash memory device is full and no more data can be saved. Use a new
USB flash memory device, or make space by erasing unwanted data from the
storage device.
USB device is write-protected. This message appears when you have attempted to write to a protected USB
flash memory device.
USB device read/write error. An error occurred while reading or writing to/from a USB flash memory device.
USB device will be formatted. This message appears before the USB device is formatted.
Waveform full. The maximum overall number of Waveforms has been exceeded when executing
the related operations.
LCD indication Description
67


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha Montage 7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha Montage 7 in the language / languages: English as an attachment in your email.

The manual is 14,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info