530341
226
Zoom out
Zoom in
Previous page
1/240
Next page
About MIDI
226
Owner’s Manual
Appendix
Pitch Bend
Pitch Bend messages are continuous controller messages
that allow the pitch of designated notes to be raised or
lowered by a specified amount over a specified duration.
Channel Aftertouch
Messages which let you control the sounds by the pressure
you apply to the keys after the initial striking of the keys,
over the entire channel.
This synthesizer does not transmit this data from the
keyboard; however, this synthesizer does properly respond
to this data when received from an external device.
Polyphonic Aftertouch
Messages which let you control the sounds by the pressure
you apply to the keys after the initial striking of the keys, for
each individual key. This synthesizer does not transmit this
data from the keyboard; however, the data is transmitted
from the internal sequencer.
SYSTEM MESSAGES
System messages are the data related to the overall system
of the device.
System Exclusive Messages
System Exclusive messages control various functions of
this synthesizer, including master volume and master
tuning, tone generator mode, effect type and various other
parameters.
General MIDI (GM) System On (Song mode/Pattern
only)
When “General MIDI system on” is received, the MO will
receive the MIDI messages which are compatible with GM
System Level 1, and consequently will not receive NRPN
and Bank Select messages.
F0 7E 7F 09 01 F7 (Hexadecimal)
n Make sure that the interval between this message and the first note
data of the song is at least a quarter note or greater in length.
Master Volume
When received, the Volume MSB will be effective for the
System Parameter.
F0 7F 7F 04 01 ll mm F7 (Hexadecimal)
* mm (MSB) = appropriate volume value, ll (LSB) = ignored
System Realtime Messages
These messages control the sequencer, that is to say Song
and Pattern.
Active Sensing (FEH)
Once FEH (Active Sensing) has been received, if no MIDI
data is subsequently received for longer than an interval of
approximately 300 msec, the MO will perform the same
function as when All Sounds Off, All Notes Off, and Reset All
Controllers messages are received, and will then return to a
status in which FEH is not monitored.
Timing Clock (F8H)
This message is transmitted with a fixed interval (24 times
per 1/4 note) to synchronize connected MIDI instruments.
You can select whether the sequencer block uses the
internal Timing Clock, or external Timing Clock messages
received via MIDI IN by setting the MIDI Sync parameter:
[UTILITY] [F5] MIDI [SF3] SYNC MIDI Sync.
Start (FAH)
This message lets the MIDI sequence data start playing
back from the beginning. This message will be transmitted
when pressing the [F] (Play) button at the top of the Song
or Pattern.
Continue (FBH)
This message lets the MIDI sequence data start playing
back from the current song position. This message will be
transmitted when pressing the [F] (Play) button at the
middle of the Song or Pattern.
Stop (FCH)
This message causes MIDI sequence data (song) to stop
playing back. This message will be transmitted when
pressing the [] (Stop) button during playback.
n You can select whether this synthesizer will transmit Timing Clock,
Start, Continue, and Stop messages by setting the SeqCtrl
parameter: [UTILITY] [F5] MIDI [SF3] SYNC SeqCtrl.
System Common Message
System Common messages also control the sequencer,
including Song Select and Song Position Pointer messages.
226


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha MO8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha MO8 in the language / languages: English as an attachment in your email.

The manual is 5,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha MO8

Yamaha MO8 User Manual - German - 239 pages

Yamaha MO8 User Manual - French - 239 pages

Yamaha MO8 User Manual - Portuguese - 240 pages

Yamaha MO8 User Manual - Spanish - 240 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info