In this mode, you can set up mixing data for your songs, and set various parameters for the tone generator parts—including the desired
Voice, as well as its level, pan, EQ, effect and other settings.
Song Mixing parameters are not actually part of the Song sequence data in each track, but rather are settings for the tone generator, as it is
played back by the Song data. As such, the Song Mixing parameter settings are not recorded to the Song tracks.
Parameter settings made in the Song Mixing mode and Song Mixing Edit mode should be stored to internal memory (DRAM) as part of the Song data.
In addition, make sure to save the entire Song data (including the Mixing settings) to the USB storage device, since the data in DRAM is stored only
temporarily (page 150).
nParameter settings in the Song Mixing mode and Song Mixing Edit mode can be stored as a template to internal Flash ROM, as well as being stored as
part of a Song. See page 94 for details.
[F6] SONG (Song Job)
01: Copy Song
This Job copies all data from a selected source
Song to a selected destination Song. The Mixing
Voice used by the source Song is also copied.
This Job overwrites any data
already existing in the destination
Song.
02: Split Song To Pattern
This Job allows you to copy a part of the current
Song – all 16 tracks over a specific range of
measures – to a specific Pattern, letting you use
Song data to create a Pattern.
This Job overwrites any data
already existing in the destination
Pattern and section.
03: Clear Song
This Job deletes all data from the selected Song or all Songs, including the Mixing Voices.
04: Song Name
This Job lets you assign a name to the selected Song. See “Basic Operation” on page 38.
Song Mixing mode
[SONG] ➞ Song selection ➞ [MIXING]
[F1] VOL/PAN
From this display you can set the Pan and Volume for each Part (track).
PANDetermines the stereo pan position for each part.
Settings:L63 (far left) – C (center) – R63 (far right)
VOLUMEDetermines the volume for each Part, allowing you to set the optimum level balance of all the Parts.
Settings:0 – 127
nYou can also adjust the Volume by using the Control Sliders. See page 52 for details.
[F2] VOICE
From this display you can select a voice for each Part. Mixing Voices can also be selected.
nThe Category Search function can also be used to select Voices here, except for Mixing Voices.
[F3] EFFECT
Pressing the [F3] EFFECT button in the Song Mixing mode calls up the [SONG] → [MIXING] → [EDIT] → [COMMON] → [F6] EFFECT display in the Song
Mixing Edit mode. From this display, you can set the effect related parameters for the current Song. See page 144 for details.
[F4] EF SEND (Effect Send)
From this display you can make basic effect settings for each Part—Send Level for the System Effect (Reverb, Chorus) as well as the Dry Level for Insertion
Effects.
nFor information on the effect connections in the Song mode, seepage 144.
[F5] VCE ED (Mixing Voice Edit)
Press the [F5] VCE ED button in the Song Mixing mode to enter the Mixing Voice Edit mode. Press the [EXIT] button to return to the original display in the
Song Mixing mode.
Normal Voices can be edited specifically for use with the Song/Pattern modes, creating a dedicated “Mixing Voice.” Refer to “Mixing Voice mode” on page
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Yamaha MO8 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Yamaha MO8 in the language / languages: English as an attachment in your email.
The manual is 5,36 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
