This mode gives you comprehensive, detailed controls for editing the MIDI events of individual Song tracks. MIDI events are messages
(such as note on/off, note number, program change number, etc.) that make up the data of a recorded Song.
Song Edit mode
[SONG] ➞ Song selection ➞ [EDIT]
[F1] CHANGE
Shows the Event List of the selected Song track. For information on how to edit the Event List, see page 90.
[F2] VIEW FLT (View Filter)
The Event View Filter lets you select the event types that appear on the Event List display ([F1] CHANGE display). For example, if you wish to edit only note
events, place a checkmark in the box next to “Note” so that only the note events appear in the Event List display.
[F5] CLR ALL (Clear All)Press the [F5] button to remove all checkmarks at once.
[F6] SET ALLPress the [F6] button to set checkmarks into all boxes.
[F4] TR SEL (Track Select)
You can switch between the display for 1 – 16 tracks, SCN (Scene) track, and TMP (Tempo) track by pressing this button.
[F5] INSERT
When the cursor is located at the desired position in the [F1] CHANGE display (Event List), pressing this button calls up the display for inserting new MIDI
events in the Song mode or Pattern mode.
NoteThis is the most common and prevalent type of data—the individual notes of a Song.
FNOTE (Note name)Determines the note name or the specific keyboard pitch of the note.
Settings:C -2 – G8
FGATE (Gate time)Determines the length of time that a note actually sounds in beats and clocks.
Settings:00:001 – 999:479
nOn this synthesizer, one clock is 1/480th of a quarter note.
FVELO (Velocity)Determines how strongly the selected note sounds.
Settings:1 – 127
PitchBendThese are the events that define continuous changes in pitch and these events are generated by Pitch Bend
Wheel operation.
FDATADetermines the Pitch Bend data.
Settings:-8192 – +8191
ProgramChangeThese events determine the Voice for the selected track.
FBANKDetermines the Voice bank.
Settings:000 – 127, ***
nBank select MSB and LSB are actually part of the Control Change set of messages (below). However, since they apply
specifically to Voice selection, they are grouped and described here.
FPC NO
(Program Change Number)
Determines the specific Voice (from the bank selected by MSB and LSB above).
Settings:000 – 127
nFor a complete list of the available voice banks and numbers, refer to the Voice List in the separate Data List booklet.
ControlChangeThese events control the sound and certain response characteristics of the voice, and are usually generated/
recorded by moving a controller (such as a modulation wheel, knob, slider or foot controller).
FCTRL NO (Control Number)Determines the Control Change number.
Settings:000 – 127
nFor details on the specific functions assigned to each of the numbers, see page 224.
FDATASee page 224.
Settings:000 – 127
Ch.AfterTouch
(Channel After Touch)
This event is generated when pressure is applied to a key after the note is played.
nThe keyboard of the MO does not feature an Aftertouch function. However, you can insert Aftertouch events into the
Song data from this display.
FDATAThis represents the amount of pressure applied to the key.
Settings:000 –127
PolyAfterTouch
(Polyphonic Aftertouch)
This event is generated when pressure is applied to a key after the note is played. Unlike Channel Aftertouch
above, this is recorded and applied independently for each key pressed.
nThe keyboard of the MO does not feature an Aftertouch function. However, you can insert Aftertouch events into the
Song data from this display.
FNOTE (Note name)Determines the key to which aftertouch is applied.
Settings:C -2 – G8
FDATAThis represents the amount of pressure applied to the key.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Yamaha MO8 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Yamaha MO8 in the language / languages: English as an attachment in your email.
The manual is 5,36 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
