530341
135
Zoom out
Zoom in
Previous page
1/240
Next page
Internal Structure (System Overview)
135
Owner’s Manual
Basic Structure
Part structure of the Tone Generator
block
The MO plays the sounds in its tone generator block in
response to MIDI messages received from external controllers
or sequencer. The MIDI messages are assigned to sixteen
independent channels, and the instrument is capable of
simultaneously playing sixteen separate Parts, via the sixteen
MIDI channels. However, the sixteen-channel limit can be
overcome by using separate MIDI “ports,” each supporting
sixteen channels.
n The USB cable supports up to eight separate MIDI ports. However,
the tone generator in the MO supports only one port.
n A single MIDI cable/connection cannot handle data over multiple
MIDI ports.
Part structure of the tone generator block in
the Voice mode
In this mode, a Voice is played using a single Part. The tone
generator block in the Voice mode receives MIDI data over a
single channel. For this reason, song data on an external
sequencer consisting of multiple MIDI channels will not play back
properly in this mode. If you are using an external MIDI sequencer
or computer to play the instrument, make sure to use the Song or
Pattern mode.
n •To set the MIDI receive channel for single timbre operation (Voice
and Performance modes), use the following operation in the Utility
mode. [UTILITY] MIDI display BasicRcvCh
• In the Voice mode, the instrument recognizes only data over MIDI
Port 1.
Part structure of the tone generator block in
the Performance mode
This mode lets you play a Performance (in which multiple Voices
or Parts are combined—in a layer, or in other configurations).
While a total of seven Parts are available in this mode (as shown
below), a maximum of four Parts can be used simultaneously.
Although this mode lets you play several Parts at the same time, all
are set to receive over the same single MIDI channel, as in the
Voice mode. For this reason, song data on an external sequencer
consisting of multiple MIDI channels will not play back properly in
this mode. If you are using an external MIDI sequencer or
computer to play the instrument, make sure to use the Song or
Pattern mode.
n •To set the MIDI receive channel for single timbre operation (Voice
and Performance modes), use the following operation in the Utility
mode. [UTILITY] MIDI display BasicRcvCh
• In the Performance mode, the instrument recognizes only data
over MIDI Port 1.
Part structure of the tone generator block in
the Song mode/Pattern mode
This mode lets you use multiple Parts and assign different Voices
to be played back for each Part. Since different MIDI channels can
be set for each Part of the tone generator block, you can use an
external MIDI sequencer to play the sounds. As illustrated below,
the sequence data of each track plays the corresponding Parts
(those having the same MIDI channel assignment) in the tone
generator block.
The MIDI Transmit Channel/Port of the Song/Pattern can be set
with the following operation.
In the Song mode: [SONG] Song selection [F3] TRACK
[SF1] CHANNEL
In the Pattern mode: [PATTERN] Pattern selection [F3]
TRACK [SF1] CHANNEL
When sounding the internal tone generator block, assign the
tracks to Transmit Port 1 and use Parts 1 – 16. Keep in mind that
data over Transmit Ports 2 or 3 cannot sound the internal tone
generator block.
The MIDI Receive Channel of the tone generator’s part can be set
with the following operation.
In the Song mode: [SONG] Song selection [MIXING]
[EDIT] Part selection [F1] VOICE [SF2] MODE
ReceiveCh
In the Pattern mode: [PATTERN] Pattern selection [MIXING]
[EDIT] Part selection [F1] VOICE [SF2] MODE
ReceiveCh
n For details about MIDI, see page 223.
n The Voice and related settings (volume, pan, etc.) are sounded by
the keyboard according to the Part parameters in the Mixing
settings of the current Song/Pattern and Part. Other settings such
as Controllers and Effect types correspond to the Common
parameters in the Mixing settings of the current Song/Pattern.
MIDI port
Voice mode
Part 1
Tone generator block
MIDI Port 1
Part 1
Part 2
Part 3
Part 4
Part 5
Part 16
Tone generator block
Performance Mode
Parts for the
internal tone
generator
Parts 5 – 16 are not used.
MIDI Port 1
Part 1
Part 2
Part 14
Part 15
Part 16
(for the internal
tone generator)
Tone generator block
Song/Pattern Mode
135


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha MO8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha MO8 in the language / languages: English as an attachment in your email.

The manual is 5,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha MO8

Yamaha MO8 User Manual - German - 239 pages

Yamaha MO8 User Manual - French - 239 pages

Yamaha MO8 User Manual - Portuguese - 240 pages

Yamaha MO8 User Manual - Spanish - 240 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info