530341

Yamaha MO8 Manual

80
Zoom out
Zoom in
Previous page
1/240
Next page
Quick Guide Creating a Song on the MO
Creating a Pattern
80
Owner’s Manual
When setting the parameter to on, you can use the
Arpeggio on this track.
Set the Bank to “pre” and Ctgr (category) to “Bass.” Try out
some different bass patterns here.
n In addition using the preset Arpeggios, you can also create your
own original Arpeggio data. See page 97.
When this parameter is set to on, you can record the
Arpeggio playback to the track as MIDI sequence data.
When the “sound” icon below is displayed, Click is on and
the metronome will play during the recording.
Play a note or notes on the keyboard to trigger Arpeggio
playback. The root chord of the bass pattern changes
depending on the key you play.
Next, let’s record the guitar pattern.
Press the [TRACK SELECT] button so that its lamp lights,
and select a Part by pressing the Number [3] button.
Follow steps 8 –14 above, this time selecting the “GtPl”
(Guitar & Plucked) in the Arpeggio category, and try out the
various guitar phrases.
Type, Loop, and Quantize
Type
The “replace” setting lets you overwrite an already
recorded track with new data. The first recording is
lost, and the new one takes its place.
The “overdub” setting lets you record (layer)
additional data to a track that already contains data.
These methods are both realtime recording methods.
The “step” setting (Step recording) allows you to
compose your performance by “writing” it down one
event at a time. For details, see page 82.
Loop
This function plays back the Pattern repeatedly in a
“loop.” If Type is set to “overdub” and Loop to “on,”
you can add separate notes or parts in order. For
example, you could record the parts of a drum kit one
by one—recording the kick on the first pass, a snare
on the second, a hi hat part on the third, and so on.
This technique is also convenient for adding non-note,
sound-shaping data, such as that of the Knobs and
Controller.
Since we will be recording with the Arpeggio in this
example, set Loop to “off” here.
Quantize
Record quantize aligns the timing of notes in real time,
as you record. This makes sure that all the notes will
be recorded exactly on the beat, even if your playing
is somewhat off the beat.
Since we will be recording with the Arpeggio in this
example, set Quantize to “off” here.
9
Set the PartSw (Part Switch) parameters to off
in the [F3] ARP display.
10
Set the Arpeggio Bank, Category, and Type.
TIP
11
Set the RecArp parameter to on in the [F4]
RECARP (Record Arpeggio) display.
12
Press the [F5] CLICK button to turn Click on
and play the metronome during the recording.
13
Press the [
F
] (Play) button to start recording.
14
Turn the [ARPEGGIO ON/OFF] indicator off,
and press the [F] (Play) button to hear your
newly recorded bass guitar pattern.
15
Select the track to which the guitar will be
assigned.
16
Record the guitar part using the Arpeggio, in
the same way you did with the bass guitar part
above.
LOCATE
REC
12
SEQ TRANSPORT
Actual recording starts
after one measure.
Start recording Arpeggio playback
Recording stops automatically
when Pattern playback reaches
the end, since Loop is set to “off.”
… 80 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha MO8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha MO8 in the language / languages: English as an attachment in your email.

The manual is 5,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha MO8

Yamaha MO8 User Manual - German - 239 pages

Yamaha MO8 User Manual - French - 239 pages

Yamaha MO8 User Manual - Portuguese - 240 pages

Yamaha MO8 User Manual - Spanish - 240 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info