530340
221
Zoom out
Zoom in
Previous page
1/240
Next page
Appendix
221
Owner’s Manual
Display Messages
Display Messages
LCD Indication Explanation
Are you sure ? [YES]/[NO] Confirms whether you want to execute a specified operation or not. Press [INC/YES] or [DEC/NO] as required.
Arp memory full The internal memory for Arpeggio data is full, preventing storing the recorded sequence data as an Arpeggio.
Arpeggio type stored The current Arpeggio type has been stored to one of the [SF1] - [SF5] buttons.
Bad USB device The USB storage device is unusable. Format the USB storage device and try again.
Bulk protected. Bulk data was received when RcvBulk was set to “protect.” (See page 209.)
Can’t make folder. No more directories can be created below the current level.
Can’t undo OK? [YES]/[NO]
When certain Song/Pattern Jobs are executed, internal memory becomes too full for use of the Undo operation.
Press [INC/YES] if this is OK, or [DEC/NO] to abort the operation. Try again after erasing unwanted Songs, Patterns,
or User phrases.
Choose user phrase.
You have attempted to record a Pattern track to which a preset phrase is assigned. If you wish to use a preset
phrase as raw material for Pattern recording, copy it to a User phrase before recording.
Completed. The specified load, save, format, or other Job has been completed.
Device number is off. Bulk data cannot be transmitted/received since the device number is off.
Device number mismatch. Bulk data cannot be transmitted/received since the device numbers don’t match.
Executing... A format operation or Job is being executed. Please wait.
File already exists. A file having the same name as the one you are about to save already exists.
File not found. The file of the specified type cannot be found on the USB storage device
Folder is too deep. Directories below this level cannot be accessed.
Folder not empty. You have attempted to delete a folder that contains data.
Illegal check box.
No check boxes have been checked in a Sequencer track Job which requires a check box selection. Check the
appropriate check box.
Illegal file The file specified for loading is unusable by the MO or cannot be loaded in the current mode.
Illegal file name. The specified file name is invalid. Try entering a different name.
Illegal input. An invalid input or value has been specified. Check the input method or value.
Illegal measure. An invalid measure number has been specified in the Song/Pattern mode. Select the measure again.
Illegal phrase number. An invalid phrase number has been specified in the Pattern mode. Select the phrase again.
Illegal track number. An invalid track number has been specified in the Song/Pattern mode. Select the track again.
Incompatible USB device A USB device which cannot be used with the MO has been connected to the USB TO DEVICE connector.
Meter mismatch
In the Pattern Job mode, the meter (time signature) of the destination Pattern is different from the meter of the source
Pattern.
MIDI buffer full. Failed to process the MIDI data because too much data was received at one time.
MIDI checksum error. An error occurred when receiving bulk data.
MIDI data error. An error occurred when receiving MIDI data.
Mixing stored In the Song/Pattern mode, the Mixing settings have been loaded from the file.
Mixing Voice full
The Mixing Voice cannot be stored because the number of Voices already stored has exceeded the maximum
capacity.
No data.
When a Song/Pattern Job is executed, the selected track or range contains no data. Select an appropriate track or
range. In addition, this message appears when a Job related to a Mixing Voice cannot be executed because the
specified Mixing Voice is not available.
No F7 (End of Exc.)
Exclusive data has been entered or changed without the necessary “End of Exclusive” byte (F7). Make sure F7 is
included.
No response from USB device
There is no response from the USB device connected to the USB TO DEVICE terminal.
Not empty folder You have attempted to delete a folder that contains data.
Now loading... (xxxx) Indicates that a file is being loaded.
Now saving... (xxxx) Indicates that a file is being saved.
Now scanning auto loaded files Scanning for the files specified for Auto Load.
Now working... Canceling the Load/Save operation by pressing the [EXIT] button.
Overwrite? [YES]/[NO]
A save operation will overwrite data on the USB storage device, and this message confirms whether it is OK to
continue or not. Press [INC/YES] or [DEC/NO] as required.
Pattern length mismatch. A Pattern Job will result in the length of a Pattern being greater than 256 measures.
Phrase length mismatch A Pattern Job will result in the length of a phrase being greater than 256 measures.
Phrase number overflow The maximum number of phrases (256) has been exceeded when recording, executing a Pattern Job, or editing.
Please keep power on.
The data is being written to Flash ROM.
Never attempt to turn off the power while data is being written to Flash ROM. Turning the power off while this
message is shown results in loss of all user data and may cause the system to freeze (due to corruption of data in
the Flash ROM). This may also result in the MO being unable to properly start up the next time the power is turned
on.
221


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha MO6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha MO6 in the language / languages: English as an attachment in your email.

The manual is 5,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha MO6

Yamaha MO6 User Manual - German - 239 pages

Yamaha MO6 User Manual - French - 239 pages

Yamaha MO6 User Manual - Portuguese - 240 pages

Yamaha MO6 User Manual - Spanish - 240 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info