530340
64
Zoom out
Zoom in
Previous page
1/240
Next page
Quick Guide Editing a Program
Editing a Performance
64
Owner’s Manual
The following briefly describes the main Performance
parameters.
Parameters for the Voice assigned to each Part
Page 174
The Voice assigned to each part and its note range can be
set also in the Performance Play mode (page 171). In
addition to the parameters available in the Performance
Play mode, the Performance Edit mode also lets you set
Portamento (pitch glide) and Arpeggio Switch (which
determines whether the Arpeggio plays a specific Part or
not).
Basic parameters for creating the sound
Page 176
Edit the parameters for each Part’s Voice such as Pitch,
Filter, and Amplitude. The parameters offset the same
parameters in the Voice Element Edit mode.
Effect related parameters Pages 143, 172
The Effects use DSP (Digital Signal Processing) to alter and
enhance the sound of a Performance. The Common Edit
display lets you edit the Effect-related parameters.
Master EQ related parameters Page 172
These parameters let you use the five-band Master EQ to
process the overall sound of the Performance. Master EQ
also features separate EQ shape parameters for the Low
and High bands, as well as the Frequency, Gain and Q
controls for each band.
Controller related parameters Page 70
For each Performance, you can assign the Control Change
Number to built-in controllers such as Knob 3 and 4
(ASSIGN1 and 2) and optionally connected controllers,
such as Footswitch and Foot Controller.
n Functions assigned to Controllers depend on the settings of each
Part’s Voice edited in the Voice Edit mode.
Arpeggio related parameters Pages 145, 173
For each Performance, you can set the Arpeggio related
parameters, such as Arpeggio type and playback tempo.
These settings can be edited in the Common Edit display.
Enter a name for the Voice from the NAME display
([COMMON]
[F1] GENERAL [SF1] NAME).
For detailed instructions on naming a Voice, refer to page
38.
The edited Performance can be stored in the Performance
Store mode. For details, see page 66.
4
Select the menu you wish to edit by pressing
the [F1] – [F6] buttons and [SF1] – [SF5]
buttons, then edit the parameters in each
display.
Part selection [F1] VOICE
Part selection [F4] TONE
[COMMON] [F6] EFFECT
[COMMON] [F2] OUT/MEF [SF3] MEF (Master Effect)
[COMMON]
[F2] OUT/MEF
[SF3] MEQ (Master Equalizer)
[COMMON] [F4] CTL ASN (Controller Assign)
[COMMON] [F3] ARP (Arpeggio)
5
Repeat steps 3 – 4 as desired.
6
Name the edited Performance.
7
Store the settings as a User Performance.
The Compare Function
You can compare the sound of the original (unedited)
Performance with the edited Performance. For details,
see page 36.
Edit Recall
If you are editing a Voice and select a different
Performance without storing the one you were editing,
all the edits you’ve made will be erased. If this
happens, you can use Edit Recall to restore the
Performance with your latest edits intact.
1 Press the [JOB] button in the Performance
mode to enter the Performance Job mode.
2 Press the [F2] RECALL button to call up the
Recall display.
3 Press the [ENTER] button. (The display
prompts you for confirmation.)
If you wish to cancel the operation, press the [DEC/NO]
button.
4 Press the [INC/YES] button to execute Edit
Recall to restore the Performance.
Enter the desired Performance name.
TIP
TIP
64


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha MO6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha MO6 in the language / languages: English as an attachment in your email.

The manual is 5,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha MO6

Yamaha MO6 User Manual - German - 239 pages

Yamaha MO6 User Manual - French - 239 pages

Yamaha MO6 User Manual - Portuguese - 240 pages

Yamaha MO6 User Manual - Spanish - 240 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info