Manual Yamaha MG24-14fx (page 16 of 28) (English)

618045

Zoom out

Zoom in

1/28

Front & Rear Panels

MG32/14FX, MG24/14FX

■ INTERNAL DIGITAL EFFECTS Section

You use this section to control the dual internal effects processor: to

select the two effect types, to set the effects on or off, and to adjust

the related signal levels and ﬂows.

1 PROGRAM Dials

This dial sets the effect type for the corresponding internal dig-

ital effect. For information about the effect types, see page 24.

2 PARAMETER Controls

This knob sets the parameter value for the corresponding inter-

nal digital effect. The setting applies to the currently selected

effect type.

The mixer saves the last value used with each effect

type. When you change to a different effect type, the

mixer automatically restores the value that was pre-

viously used with the newly selected effect (regard-

less of the current position of the Parameter Control

knob). These parameter values are retained even

after power-off.

3 AUX PRE Controls (1 to 4)

Each knob adjusts the level of the effected sound into the corre-

sponding AUX bus (AUX1 to AUX4).

4 TAP Button and Indicator

This feature lets you set the delay time for internal EFFECT 2

by tapping on the button. The feature only works if you have

set the effect type for EFFECT 2 to [16] TAP DELAY. To set

the delay time, tap on the button at the appropriate interval. The

mixer measures the interval between the last two taps and sets

this as the delay time. Continue tapping as necessary until you

get the timing right.

The mixer retains the last time setting even after power goes

off, and restores this setting the next time you set the effect

type to TAP DELAY. The indicator next to the button ﬂashes in

sync with the delay time.

5 ON Switches

This switch turns the corresponding internal digital effect on

() or off ( ).

6 PFL (Pre-Fader Listen) Switches

Use this switch to feed the corresponding digital effect signal,

taken from before the EFFECT RTN fader, into the PFL bus, so

that you can monitor the signal from the PHONES jack. To

turn the PFL feed on, press the switch in ( ).

The signal will not feed into the PFL bus if the

effect’s ON switch (5) is turned off.

7 GROUP Switches

Set the switch on ( ) to feed the corresponding internal digi-

tal effect signal into the corresponding GROUP buses. The top

button feeds the signal to Groups 1 and 2; the lower button

feeds it to Groups 3 and 4.

8 ST Switches

Set this switch on to feed the corresponding internal digital

effect signal into the ST bus.

9 EFFECT RTN faders (1, 2)

This fader adjusts the level of the effected sound into the ST

and GROUP buses.

NOTE

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha MG24-14fx in the language / languages: English as an attachment in your email.

The manual is 6,92 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Yamaha MG24-14fx Manual

Product: