425042
20
Zoom out
Zoom in
Previous page
1/29
Next page
MG206C/MG166CX/MG166C Owner’s Manual
Reference
20
Troubleshooting
Power doesn’t come on.
Is the supplied power adaptor properly plugged into an appropriate AC wall
outlet?
Is the supplied power adaptor properly plugged into the mixer?
No sound.
Are microphones, external devices, and speakers connected correctly?
Are the ON switch and ST switch of the channels you are using turned ON?
Are the channel GAIN controls, Channel fader, STEREO OUT Master fader
and GROUP 1-2/3-4 fader set to appropriate levels?
Are the MONITOR switch and 2TR IN switch set properly?
Are your speaker cables connected properly, or are they shorted?
If the above checks do not identify the problem, call Yamaha for service.
(Refer to the page 71 for a list of service centers.)
Sound is faint, distorted, or
noisy.
Are the channel GAIN controls, Channel fader, STEREO OUT Master fader
and GROUP 1-2/3-4 fader set to appropriate levels?
Are two different instruments connected to the XLR-type and phone jacks, or
to the phone and RCA pin jacks on one channel? Please connect to only one
of these jacks on each channel.
Is the input signal from the connected device set to an appropriate level?
Are you applying the effects at an appropriate level?
Are microphones connected to the MIC input jacks?
If you are using condenser microphones, is the PHANTOM +48 V switch
turned ON?
No effect is applied.
(If you are using MG166CX)
Check that the EFFECT control on each channel is correctly adjusted.
Be sure that the internal effect unit’s ON switch is turned ON.
Be sure that the EFFECT PARAMETER control and EFFECT RTN fader are
correctly adjusted.
I want spoken words to be
heard more clearly.
Be sure that the switches are ON.
Adjust the equalizers (HIGH, MID and LOW) on each channel.
I want to output a monitor
signal through speakers.
Connect a powered speaker to the AUX 1, 2 or 3 jack (MG206C), or to the
AUX1 or 2 jack (MG166CX/MG166C) and turn the PRE switch on each chan-
nel on. Then adjust the output signal by using the AUX controls on each chan-
nel and the Master SEND control.
The level meter doesn’t
show the output signal
level.
Are the PFL switches for the channels that you are not using turned on?
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha mg166c 16 kanaals mengpaneel at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha mg166c 16 kanaals mengpaneel in the language / languages: English as an attachment in your email.

The manual is 2,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info