464217
18
Zoom out
Zoom in
Previous page
1/29
Next page
Front & Rear Panels
MG206C/MG166CX/MG166C Owner’s Manual
Reference
18
C Master SEND Controls (AUX, EFFECT)
Adjusts the signal level sent to the SEND (AUX, EFFECT)
jacks.
If you are using the MG166CX, the Master SEND
control (EFFECT) does not affect the level of the sig-
nal sent from the EFFECT bus to the internal digital
effect processor.
D MONITOR/PHONES
MONITOR switches
These switches select the signal sent to the MONITOR OUT
jacks, PHONES jack and the level meter from STEREO L/R
bus, GROUP 1/2 bus or GROUP 3/4 bus.
STEREO L/R bus: STEREO ( )
GROUP 1/2 bus: GROUP ( ), 1-2 ( )
GROUP 3/4 bus: GROUP ( ), 3-4 ( )
MONITOR Control
Controls the level of the signal output to the PHONES jack
and the MONITOR OUT jacks.
E 2TR IN
2TR IN Switch
If this switch is set to TO MONITOR ( ), the signals input
via the 2TR IN jacks are sent to the MONITOR OUT jacks,
the PHONES jack, and the level meter. If it is set to TO STE-
REO ( ), the signals are sent to the STEREO L/R bus.
2TR IN Control
Adjusts the level of the signal sent from the 2TR IN jacks.
The following illustration shows how the switch settings cor-
respond to the signal selection.
*: When overdubbing, you can adjust the levels of the mon-
itor playback signal and the signal being recorded separately.
MONITOR MIX Signal Flow
If the input channel PFL switch is on ( ), then only
the PFL output from that channel is sent to the MON-
ITOR OUT jacks, PHONES jack, and level meter.
F GROUP 1-2 Fader
Adjusts the signal level sent to the GROUP OUT 1/2 jacks.
G GROUP 3-4 Fader
Adjust the signal level to the GROUP OUT 3/ 4 jacks.
H ST Switch
If this switch is on, the signals are sent to the STEREO L/R
bus via the GROUP 1-2 fader or GROUP 3-4 fader. The
GROUP 1 and 3 signals go to STEREO L and the GROUP 2
and 4 signals go to STEREO R.
I STEREO OUT Master Fader
Adjusts the signal level sent to the STEREO OUT jacks.
Switches
Signals output via the
MONITOR/PHONES
jacks
PFL
MONITOR/
PHONES
2TR IN
ON
PFL
OFF
STEREO
TO STEREO
STEREO (+ 2TR IN)
TO MONITOR
STEREO + 2TR IN
*
GROUP
1-2
TO STEREO
GROUP 1-2
TO MONITOR
GROUP 1-2 (+ 2TR IN)
3-4
TO STEREO
GROUP 3-4
TO MONITOR
GROUP 3-4 (+ 2TR IN)
NOTE
Playback
signal
Recording
signal
2TR IN
2TR IN control
STEREO OUT Master fader
MONITOR/PHONES controls
STEREO
bus
REC OUT
jacks
MONITOR
OUT/PHONES
jacks
NOTE
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha MG 206 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha MG 206 in the language / languages: English as an attachment in your email.

The manual is 2,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info