425049
7
Zoom out
Zoom in
Previous page
1/21
Next page
7
Mixer Basics
MG82CX/MG102C Owner’s Manual
Making the Most of Your Mixer
You’ve got yourself a mixer and now you’re ready to use it.
Just plug everything in, twiddle the controls, and away you go … right?
Well, if you’ve done this before you won’t have any problems, but if this is the first time you’ve
ever used a mixer you might want to read through this little tutorial and pick up a few basics
that will help you get better performance and make better mixes.
Balanced, Unbalanced—What’s the Difference?
In a word: “noise.” The whole point of balanced lines is noise rejection, and it’s something they’re very good at.
Any length of wire will act as an antenna to pick up the random electromagnetic radiation we’re constantly
surrounded by: radio and TV signals as well as spurious electromagnetic noise generated by power lines,
motors, electric appliances, computer monitors, and a variety of other sources. The longer the wire, the more
noise it is likely to pick up. That’s why balanced lines are the best choice for long cable runs. If your “studio” is
basically confined to your desktop and all connections are no more than a meter or two in length, then
unbalanced lines are fine—unless you’re surrounded by extremely high levels of electromagnetic noise.
Another place balanced lines are almost always used is in microphone cables. The reason for this is that the
output signal from most microphones is very small, so even a tiny amount of noise will be relatively large, and
will be amplified to an alarming degree in the mixer’s high-gain head amplifier.
Signal Levels and the Decibel
Let’s take a look at one of the most commonly used units in
audio: the decibel (dB). If the smallest sound that can be heard
by the human ear is given an arbitrary value of 1, then the
loudest sound that can be heard is approximately 1,000,000
(one million) times louder. That’s too many digits to deal with
for practical calculations, and so the more appropriate
“decibel” (dB) unit was created for sound-related
measurements. In this system the difference between the
softest and loudest sounds that can be heard is 120 dB. This
is a non-linear scale, and a difference of 3 dB actually results
in a doubling or halving of the loudness.
You might encounter a number of different varieties of the dB:
dBu, dBV, dBM and others, but the dBu is the basic decibel
unit. In the case of dBu, “0 dBu” is specified as a signal level of
0.775 volts. For example, if a microphone’s output level is –40
dBu (0.00775 V), then to raise that level to 0 dBu (0.775 V) in
the mixer’s preamp stage requires that the signal be amplified
by 100 times.
A mixer may be required to handle signals at a wide range of levels, and it is necessary match input and output
levels as closely as possible. In most cases the “nominal” level for a mixer’s input and outputs is marked on the
panel or listed in the owner’s manual.
Noise cancelled
Balanced noise cancellation
Noise
Hot (+)
Ground
Cold (–)
Cable
Source
Receiving device
Phase
inversion
Noise-free
signal
Phase
inversion
To summarize
Microphones: Use balanced lines.
Short line-level
runs:
Unbalanced lines
are fine if you’re in a
relatively noise-free
environment.
Long line-level
runs:
The ambient
electromagnetic
noise level will be
the ultimate
deciding factor, but
balanced is best.
+ 20 dBu
0 dBu
0.775 V
-
20 dBu
-
40 dBu
-
60 dBu
The inputs and outputs on
home-use audio gear
usually have a nominal level
of –10 dBu.
Most professional mixers,
power amplifiers, and other
types of equipment have
inputs and outputs with a
nominal level of +4 dBu.
Microphone signal levels
vary over a wide range
depending on the type of
microphone and the source.
Average speech is about
–30 dBu, but the twittering
of a bird might be lower than
–50 dBu while a solid bass
drum beat might produce a
level as high as 0 dBu.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha mg 102 c compact mengpaneel met 10 kanalen at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha mg 102 c compact mengpaneel met 10 kanalen in the language / languages: English as an attachment in your email.

The manual is 1,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha mg 102 c compact mengpaneel met 10 kanalen

Yamaha mg 102 c compact mengpaneel met 10 kanalen User Manual - German - 21 pages

Yamaha mg 102 c compact mengpaneel met 10 kanalen User Manual - French - 21 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info