557717

Yamaha MDX-E300 Manual

17
Zoom out
Zoom in
Previous page
1/184
Next page
15
English
English
Music synchro recording
The synchronized recording function lets you set this unit
to start recording automatically when a sound signal is
input.
1 Load the sound source into the source component.
• If necessary, program, or select the track you want
to start recording from before proceeding to the
next step. (Refer to the operation manual supplied
with the source component for instructions
regarding its use.)
2 Press INPUT repeatedly to select the input connected
to the sound source you want to record.
3 Press SYNC to set this unit to record pause mode.
• The REC * indicators light up.
“Synchro REC” and the amount of time available
for recording flash alternately in the display.
During synchronized recording, analog input
sources are recorded at the current ANALOG
REC LEVEL setting, digital sources are recorded
at the 0 dB level.
The MD starts recording automatically when a
sound signal is input. When the sound signal
stops, the unit switches back to record pause mode
and “Synchro REC” blinks in the display. The
next time a sound signal is detected, recording
starts again. In this manner, the presence of a
sound signal automatically switches the unit
between record and record pause modes.
4 Start playing the sound source.
To cancel the synchronized recording
mode
Press &.
Note
• When the signals at the beginning of a track are lower than the
level required to start synchronized recording, they are not
recorded. Should this occur, perform manual recording.
SYNC
INPUT
REC MODE
&
Setting the recording
mode
This unit incorporates various recording modes. Choose
the one that suits your needs.
Press REC MODE repeatedly until the indicator for the
desired recording mode lights up.
Example: When using an 80 minute MD
MONO (monaural)
This mode provides 160 minutes monaural recording.
LP2
This mode provides 160 minutes stereo recording.
LP4
This mode provides 320 minutes stereo recording.
When all of the above indicators are turned off, this unit
enters normal stereo recording mode.
Notes
• MDLPs (= discs recorded in LP mode) cannot be played back
nor edited on non MDLP players. If you play MDLPs (=discs
recorded in LP mode) on a non-MDLP player, “LP:” will
appear at the top of the title and no sound will be reproduced.
• Normal stereo recording provides the best sound quality.
• The recording mode cannot be changed during recording.
A-B S/F
DISPLAY
POWER
SCROLL
REC/
PAUSE
SYNC
M-MARK REC MODE
INPUT
RANDOM PROGRAM
REPEAT
A-B S/F
DISPLAY
POWER
SCROLL
REC/
PAUSE
SYNC
M-MARK REC MODE
INPUT
RANDOM PROGRAM
REPEAT
RECORDING
0105MDXE300(M).13-16.E 02.5.17, 10:54 AM15
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha MDX-E300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha MDX-E300 in the language / languages: English, German, Dutch, French, Italian, Swedish, Spanish as an attachment in your email.

The manual is 2,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info