157308
27
Zoom out
Zoom in
Previous page
1/75
Next page
Connecting to the network
28
Configuring your MusicCAST client manually
Usually, the Auto Configuration functions of the MusicCAST server and client will enable you to
successfully connect all of your MusicCAST components. However, you can also use the screens detailed in
this section to configure the MusicCAST network manually if necessary. This section of this manual (see
pages 25 34) explains how to set each network parameter in the MusicCAST client.
Carry out the following actions, before attempting to configure your MusicCAST client:
If you wish to connect to a MusicCAST server over a wireless network, check that the MusicCAST client
is close enough to the server to receive a wireless network signal (see page 23 for details)
Check that the MusicCAST client is connected to an AC adaptor that is connected to an AC outlet
Turn the MusicCAST server power on
Turn the MusicCAST client power on
Confirm that the following have been set on the MusicCAST server:
The Client IDs of all of the MusicCAST clients that you wish to use on the network (See pages 67, 68 for
an explanation of how to check the Client ID of your MusicCAST client)
The ESS ID of the wireless network, if you plan to use wireless network connections
The Subnet Mask address
The WEP key
To configure the client you must set the parameters listed below from the Network menu. The order
in which you set the parameters is unimportant, but you should ensure that you carry out each
procedure correctly.
Network mode
ESS ID
Server ID
IP Address (for the MusicCAST client) (This is not necessary if you are using the MusicCAST client in a
network with a component acting as a DHCP server, or if your MusicCAST server is set to act as a DHCP
server)
WEP key
Subnet Mask
Note
The MusicCAST server and MusicCAST client only function correctly if they are under the same subnet
running under one or more network hubs.
102_Musiccast_E.p65 2003.06.28, 19:0228
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha mcx-a10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha mcx-a10 in the language / languages: English as an attachment in your email.

The manual is 3,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info